Write failed writing to disk linux

Solved: Curl error: Failed writing received data to disk/application on Linux

In this article, I will explain you about the curl error: Failed Writing received data to disk/application on Linux and the steps to solve this error. This error could show due to various reasons. One of the common reason is the disk space utilization which happened with me. I will take you through the detail explanation which I followed to solve this error. Hopefully the same will work for you as well.

Curl error: Failed writing received data to disk/application on Linux

Last night when i was trying to update my Server, I faced below curl error: Failed writing received data to disk/application on Linux. While looking into this error i thought to put the steps required to solve this issue in an article so that it might help you guys also in case you are also facing the same issue.

When you encounter above error, the first thing you need to do is to clean up the cached packages by using dnf clean packages command as shown below.

Then you need to check the total disk usage to confirm you have enough space available to install all the updates in your Server. Check DNF Man Page to know more about DNF command.

Here my root(/) partition showing 100% utilized so to install any further updates we need to free up some space. After freeing up sufficient space you can again try to run the update using same dnf update -y command as shown below. This time you will see update will be completed successfully.

If you see the same error «Failed writing received data to disk/application on Linux» again then probably there is some issue with that specific package. So you might need to update that package manually by running dnf update curl -y command as in my case. You might get this error «Failed writing received data to disk/application on Linux» with some other package so you need to update that package first and then again run dnf update -y command to check if that solves your issue. Usually these steps are enough to solve this issue. If it still does not have any effect then you can write me in comment box to look into the issue further.

Popular Recommendations:-

Источник

8 Tips to Solve Linux Hard Disk Problems: Like Disk Full Or Can’t Write to the Disk

C an’t write to the hard disk on a Linux or Unix-like systems? Got Linux hard disk problems? Want to diagnose corrupt disk issues on a server? Want to find out why you are getting “disk full” messages on screen? Want to learn how to solve full/corrupt and failed disk issues. Try these eight tips to diagnose Linux and Unix server hard disk drive problems.

Various Linux Hard Disk Problems

As a developer or sysadmin, you may run into the following problem

• Running out of the disk space on Linux or Unix box
• Disk corruption
• File system corruption
• Disk quota
• RAID card failure
• SSD/Hard disk failure in software/hardware RAID and so on.

Let us see how tips on how to solve Linux and Unix hard disk problems.

1 – Error: No space left on device

When the Disk is full on Unix-like system you get an error message on screen. In this example, I’m running fallocate command and my system run out of disk space:

The first step is to run the df command to find out information about total space and available space on a file system including partitions:
$ df
OR try human readable output format:
$ df -h
Here is what I saw on my system:

From the df command output it is clear that /dev/sda10 has 4.0Gb of total space of which 4.0Gb is used. You can also use the duf command, ncdu command, or pydf command tools that provides disk usage information on your server or desktop. However, these tools needs to be pre-installed on the box.

duf comand in action

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

Using ncdu command to check for disk hogs on Linux or Unix

pydf is yet another colorful and helpful visual aid tool to solve Linux and Unix hard disk problems. For example, am I running out of disk space?

Fixing problem when the disk is full

1. Compress uncompressed log and other files using gzip or bzip2 or tar command:

2 – Is the file system is in read-only mode?

You may end up getting an error such as follows when you try to create a file or save a file:
$ cat > file
-bash: file: Read-only file system
Run mount command to find out if the file system is mounted in read-only mode:
$ mount
$ mount | grep ‘/ftpusers’
To fix this problem, simply remount the file system in read-write mode on a Linux based system:
# mount -o remount,rw /ftpusers/tmp
Another example, from my FreeBSD 9.x server to remount / in rw mode:
# mount -o rw /dev/ad0s1a /
Linux file system enters in read-only mode when it detects disk or filesystem problems. Hence, it is best to check if the disk is failing badly. Check for the overall health of your disk:
$ sudo smartctl -d ata -H /dev/sda
Once the test completed, run the following to see if disk is failing
$ sudo smartctl —attributes —log=selftest /dev/sda
See Test If Linux Server SCSI / SATA / SSD Hard Disk Going Bad page for detailed instuctions on the smartctl command.

3 – Am I running out of inodes?

Sometimes, df command reports that there is enough free space but system claims file-system is full. You need to check for the inode which identifies the file and its attributes on a file systems using the following command:
$ df -i
$ df -i /ftpusers/
Sample outputs:

So /ftpusers has 62,50,496 total inodes but only 11,568 are used. You are free to create another 62,38,928 files on /ftpusers partition. If 100% of your inodes are used, try the following options:

• Find unwanted files and delete or move to another server.
• Find unwanted large files and delete or move to another server.

4 – Is my hard drive is dying?

I/O errors in log file (such as /var/log/messages) indicates that something is wrong with the hard disk and it may be failing. You can check hard disk for errors using smartctl command, which is control and monitor utility for SMART disks under Linux and UNIX like operating systems. The syntax is:

Источник

Write failed writing to disk linux

When I try to install Hearts of Iron IV in my Ubuntu 16.04 LTS, it always says «disk write error».

An error occured while updating Hearts of Iron IV (disk write error):
home/ /.local/share/Steam/steamapps/downloading/394360/wiki/load.php@debug=false&lang=en&modules=mediawiki.action.view.categoryPage.styles%7Cmediawiki.helplink%2CsectionAnchor%7Cmediawiki.legacy.commonPrint%2Cshared%7Cmediawiki.skinning.interface%7Cskins.vector.styles&only=styles&skin=vector.css

Can anybody help me fix that?

You do have enough free space?

I do have, a lot of space

Does this happen when you are trying to install other games too?

1- go to steam settings, clear download cache and try again
2- change download server location on steam settings
3- go to steam settings and create a secondary games folder somewhere and try again (choosing the new folder when asked by the game installer dialog)

If nothing works:
— Is any step to that folder path following a symbolic link?
— Is the steam games library in an NTFS partition?

I’m having the same issue. The problem seems to be that this file name is too long for ext4: load.php@debug=false&lang=en&modules=mediawiki.action.view.categoryPage.styles%7Cmediawiki.helplink%2CsectionAnchor%7Cmediawiki.legacy.commonPrint%2Cshared%7Cmediawiki.skinning.interface%7Cskins.vector.styles&only=styles&skin=vector.css

EDIT: Seems like I was wrong, it had to do something with my encrypted home. I solved it by moving my .steam directory outside my home, then mounting it back to it’s original location.

FWIW, in my case (home directory on a NFS share, steam games on /opt/steam), I was able to solve the issue by linking the downloading directory to a local partition, like so:

/.steam/steam/steamapps rm -rf downloading/ ln -s /opt/steam/downloading/ downloading

FWIW, in my case (home directory on a NFS share, steam games on /opt/steam), I was able to solve the issue by linking the downloading directory to a local partition, like so:

/.steam/steam/steamapps rm -rf downloading/ ln -s /opt/steam/downloading/ downloading

Yep, if you use NFS4, the solution is to make downloading/ directory be a symlink to some other local file system (i.e. ext4 or tmpfs), possibly use NFS3 with some local_lock=flock mount option, or use a LD preload to disable use of flock for steam, it should be relatively safe I guess.

Unfortunately it is still not fixed in Steam client as of today.

I had this issue installing straight to /opt/games installing a Valheim server. I solved this with permissions (sudo chown -R $USER:$USER /opt/games) in case anybody has this issue.

Thank you, although my path was /usr/games, changing the permission like this helped me get my Valheim server installed.

i got the disk write error when trying to install proton experimental.

in my case the problem seems to be that my main partition is luks encrypted and it has something to do with that.

i created a second UNencrypted ext4 partition and set it as default installation dir in settings.

now everything works fine.

@giluks
that’s bizarre that proton won’t be installed/work properly from a luks-encrypted partition. it should be totally transparent and just work, as it does for every other app except ones that need to actually handle partitioning and disk encryption.

it’s a hint that Valve may be implementing their library data handling at a lower abstraction level than it should. and coherent with several reports of steam sometimes not working over some linux-compatible partition types, not just NTFS

did you open an issue on their github bug tracker for this?

No problems with Proton (or anything else) with encrypted partitions for me.

Disk write error can also happen when an update is unable to replace a directory, usually because it is not empty. Making a new filesystem would fix that by accident.

i got the disk write error when trying to install proton experimental.

in my case the problem seems to be that my main partition is luks encrypted and it has something to do with that.

i created a second UNencrypted ext4 partition and set it as default installation dir in settings.

Источник

Write failed writing to disk linux

Hello, I wanted to install an ARK: Survival Evolved Server on my Linux (Debian 10) server. But everytime I want to download it I get the error «ERROR! Failed to install app ‘376030’ (Disk write failure)»

There is enough space (over 50GB) and the hdd / ssd doesn’t have any problems. At least my hoster would already have noticed it, if it would be a dead hdd / ssd.

hmm any anti virus app, that has been caugth in blocking and make disk write error because its blocked, im not sure linux have same issue.

windows have chkdsk, im sure Linux grp can help you better.
because if they cant, you are in trouble.

50 gb , are you a joke here , thats nothing, if you dont have 3 to 5 times more then that, then you have not learn anything about how unpacking can expand , and linux or not, will not help you here.

and its funny we never see people with new and empty disk in trouble, its always thery last 200 to 250 gb free space left, that has problem here.

dont forget hard words from linux owner , it always windows user that cant figureout anything, im pretty sure you have never hear that before, right. ( go fix your problem and return with solution. )

hmm any anti virus app, that has been caugth in blocking and make disk write error because its blocked, im not sure linux have same issue.

windows have chkdsk, im sure Linux grp can help you better.
because if they cant, you are in trouble.

50 gb , are you a joke here , thats nothing, if you dont have 3 to 5 times more then that, then you have not learn anything about how unpacking can expand , and linux or not, will not help you here.

and its funny we never see people with new and empty disk in trouble, its always thery last 200 to 250 gb free space left, that has problem here.

dont forget hard words from linux owner , it always windows user that cant figureout anything, im pretty sure you have never hear that before, right. ( go fix your problem and return with solution. )

hmm any anti virus app, that has been caugth in blocking and make disk write error because its blocked, im not sure linux have same issue.

windows have chkdsk, im sure Linux grp can help you better.
because if they cant, you are in trouble.

50 gb , are you a joke here , thats nothing, if you dont have 3 to 5 times more then that, then you have not learn anything about how unpacking can expand , and linux or not, will not help you here.

and its funny we never see people with new and empty disk in trouble, its always thery last 200 to 250 gb free space left, that has problem here.

dont forget hard words from linux owner , it always windows user that cant figureout anything, im pretty sure you have never hear that before, right. ( go fix your problem and return with solution. )

I don’t have any anti virus. The command grp doesn’t exist. I already had an ARK Server installed and it only needed 13GB, I don’t think they released a update with 40GB. I think you even forget that we are speaking about a server, not the game.

I don’t have any anti virus. The command grp doesn’t exist. I already had an ARK Server installed and it only needed 13GB, I don’t think they released a update with 40GB. I think you even forget that we are speaking about a server, not the game.

ask ark support then. there is no one else that has support, and if linux people cant help you, i doubt windows user can.

Server, game, or whatever Steam files are compressed and require scratch space to decompress and decode; I would conjecture Steam still will need more free space.

Were you able to fix this? Having the same issue with 250gb left.

Edit: Same thing on my Windows machine, 600GB free. Maybe some more toxicity from Iceira can fix it.

I had this issue earlier, managed for fix it. I’m not entirely sure what the exact fix is but follow these steps and you should get past this annoying error.

1, After steamcmd.exe has been downloaded and install
2, Find the drive you would like to install the Ark server on
3, Create a folder called exactly «arkserver» no capitalisation
4, Open your arkserver folder and create another folder inside called «steamapps» again, no capitalisation
5, Type «login USERNAME PASSWORD STEAM_GUARD» replacing the capitalised words with your username, your password and your steam guard key if you have it enabled and then press enter. It should look like this: «login aKimbodiac password123 ABC123»
6, Once you get the «ok» response type «force_install_dir YOUR_DRIVE_LETTER:\arkserver» then press enter. It should look like this: force_install_dir C:\arkserver»
7. With any luck. This should work.

if in doubt, navigate steamcmd\logs\content_log.txt and scroll to the bottom, this should give you an error like this:

[2021-06-08 19:58:18] Loaded 0 apps from install folder «e:\arkserver\steamapps\appmanifest_*.acf».
[2021-06-08 19:58:26] Library folder «e:\arkserver\steamapps» is not writable (Disk write failure).

As you can see, it was trying to add «appmanifest» to a folder that did not exist while not attempting to create it either.

I know this is a fix for windows but I hope this helps!

Have had this issue for the past couple days as well on my Win10 PC.
Trying to setup a new Dedicated Server on the same computer that already had previous servers working.

Had to make a new folder «ArkServer’, then copy SteamCMD.exe to that folder and run it, let it do its thing.

Made a .bat file in the same folder with .. «steamcmd +login anonymous +force_install_dir D:\ArkServer +app_update 376030 validate» ..

Ran the .bat file and let it install the server to the same folder that SteamCMD is in.

It gave a comment about installing the Server to a folder that Steam was in, but then proceeded to download it anyway.

I had this issue earlier, managed for fix it. I’m not entirely sure what the exact fix is but follow these steps and you should get past this annoying error.

1, After steamcmd.exe has been downloaded and install
2, Find the drive you would like to install the Ark server on
3, Create a folder called exactly «arkserver» no capitalisation
4, Open your arkserver folder and create another folder inside called «steamapps» again, no capitalisation
5, Type «login USERNAME PASSWORD STEAM_GUARD» replacing the capitalised words with your username, your password and your steam guard key if you have it enabled and then press enter. It should look like this: «login aKimbodiac password123 ABC123»
6, Once you get the «ok» response type «force_install_dir YOUR_DRIVE_LETTER:\arkserver» then press enter. It should look like this: force_install_dir C:\arkserver»
7. With any luck. This should work.

if in doubt, navigate steamcmd\logs\content_log.txt and scroll to the bottom, this should give you an error like this:

[2021-06-08 19:58:18] Loaded 0 apps from install folder «e:\arkserver\steamapps\appmanifest_*.acf».
[2021-06-08 19:58:26] Library folder «e:\arkserver\steamapps» is not writable (Disk write failure).

As you can see, it was trying to add «appmanifest» to a folder that did not exist while not attempting to create it either.

I know this is a fix for windows but I hope this helps!

Источник