How to install plastic window with their hands?

Windows, plastic is instantly attracted consumers immediately after its release on the market. Currently, almost nobody sets their classic wooden counterparts. Their advantage is in the fact that installing them may not only a professional with experience. After reading this article you will learn how to properly install a plastic window. So, let’s start.

With the installation of double-glazed Windows features the following details:

• You can install them even in winter. However, you yourself should understand that it is best to work in warm time of the year. In addition, summer and spring mounting foam hardens better. So how to install plastic window You need all the instructions, this process may take more than one day to live in a windswept apartment is not too comfortable.
• The Need for accurate measurements of window openings. The success of the measurements depends on the success of the event.

If you want to install plastic Windows cheaply (yourself) in the panel house, you should also measure the internal opening. The fact that in such cases the box with the frames rests on the opening section which resembles the letter “G”. The measurements were carried out in the following steps:

• Measure the distance between the side jambs;
• Measure the distance from the sill to slope both sides;
• Note that the width of the sill should be equal to the width of the wall, excluding the width of the profile.

Before how to install plastic window in a brick house, should determine a bearing wall, since it is usually a thick layer of plaster. It should be taken into account by measuring the window openings.

It is believed that the easiest way to install double-glazed Windows in a wooden house, but it is not. Note that the tree – the material is capricious, easily expands and contracts under the influence of environmental factors. So to install Windows you need to okoshechka. It is independent design of timber similar to the trim of the door frame. Thanks to her, the window is not jammed and does not deform due to the «movements» of the tree.

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I.

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic.

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make.

Once again: > so how to install plastic window is quite difficult, you must carefully follow the instructions.

• Pulling the plugs, get yourself a glass.
• To Mark each of them so as not to confuse with the installation.
• Remove the protective film from the ends, glued in its place a paper tape or a similar coating.
• At the end of the plastic frame glued vapor barrier tape.
• By Setting the opening the bearing pads, put them in the assembled window.
• Carefully adjust it, using the building level.
• Finally lock the box by means of metal profiles and to fill the void of quality foam.
• Set the window-sill, sills, and then carry out the installation of double-glazed Windows. Attach the plug you need to start from the top.
• Install the inner slopes, and to attach decorative profile.

If you’re going to comply with all our instructions to install plastic Windows (Moscow their range will amaze anyone) can quickly and efficiently. Wish you success!

New features rustic construction: making the Windows with their hands Bashny.Net

The window to do with your hands, of course, optional. On the market there are many models of wooden and plastic Windows with wide range of prices and available options. However, in a country house sometimes require wood Windows for outbuildings, sheds or porches in the house. Which you have no time or simply no desire to order the design from the supplier of the Windows. And whatever you decide to do the work yourself.

The most important thing in this case is the correct geometry of the window and its tightness. And if you make the window with your hands, you need to remember that the same accuracy on the machine, to achieve it will be very difficult. However, to make a quality wooden box with your hands you quite a force if you will tools like hammer, drill, screwdriver, chisel and planer.

So, where to start to do window? First, you must make the project window on paper. Beginners may be advisable to make it in full size or in the ratio of 1 to 2, it was easier then to calculate the quantity of materials necessary for the manufacture of the window. For the first time take to manufacture the pine boards. You can use the more expensive material, but still the first experience of getting on an oak array is optional.

Check that the Board was knots and cracks. Because the box, which you will do, as the basis for future window, it needs to be smooth and even.

Select a Board size 150 x 50 mm. the workpiece need to make a groove in the form of the letter «G». Further 4 parts of the window block you join the carpenter’s glue, and then fix the wooden rods for better strength. The rods are inserted into specifically (and in advance) drilled for this hole.

If you do not fix a design rods — the block will not be right angles, and the design can be shaky. Then you insert the unit into the prepared opening and fix to the wall with plugs. Commit the result with screws and gaps sealed with foam.

To make the window frame, you will need lumber 6 x 4 cm size of the beam will depend on how you want to look your window. If, for example, the window of the veranda, and it assumes that there is only one glass, it is necessary to make 2 rectangular groove. They will need to embed the glass and the subsequent installation of a window in the box. If you dvuhstekolnye profile — you will need one additional slot for a second glass.

As for the glass — you will just buy a sheet thickness of 4 mm.

Prepare the boards for the frame. To do this, cut or sawed at an angle of 45 degrees. Connect profile a thorn-groove, fasten with screws to provide rigidity. Tighten the screws tightly so that the hat went into the wood completely.

Size of glass — a very important detail. It needs to be calculated to 1 mm if in your house or on the deck you don’t want noise, drafts and dust. Cut glass with a diamond glass cutter and the edges polished with fine emery paper. Do not forget to wear gloves and goggles to avoid damage to eyes and hands.

To cut glass, you need to make a line and hold the glass cutter along the edge, and then break off the desired segment. Then, after you prepare the glass, they will need to be inserted into the frame for fitting. Then remove, apply edge sealer and then place the glass into the groove completely. Attached glass frame glazing beads and thin nails. If fillets are too wide — you can mount them with screws.

If your window consists of two parts, the middle to the frame to mount the vertical bar and make it the same grooves. One frame window in this case is more subtle, and it needs to be manufactured separately. To the main frame its attached hinged loops. Having done that, you will get the opening sash.

Then you screws attach it to the handle, and a chisel make a groove for closing the window. That’s all, as I said — there is nothing in this world is impossible.

Your window should now be inserted into the unit and lock in the slots. To fix window need not to redo this work later. Better to do it with screws that are of sufficient size to pass through the box. Take this nail gun.

When finished seal the cracks with foam, then trim the excess after drying (if they will) and you’re done! Now you can plaster the walls and to engage in the installation of the tide. Or sill. Surely you will make it all nice and neat. published

Repair of old wooden windows with their hands

Usually, Wood windows have always been and still remains the most beautiful and quality windows, among such a wide range of, available on the market. It goes without saying, It is now very different technology used in the manufacture of wooden windows and the quality of, the resulting, It can not compare with the quality of the windows, which were installed in our home years 15 – 20 ago. Respectively, after all these years, old wooden windows need to be replaced, or repair, warming. Most people, of course, think, that the restoration of wooden windows with their hands — an unnecessary process and better to buy and install new modern plastic window, but they do not have those qualities, which are present in the timber, and especially the restoration of the old technology is not is costing you a pretty penny, as opposed to buying new. It is not necessary to have special skills and knowledge, that their own hands to restore its old window, as this process is not complicated. Let us mention some of the key steps.

stages of work:

Prepare your old frames strippers will Top first action during the restoration of the windows with their hands. This procedure is done in two ways: mechanical, any chemical. The first option will demand a little more tools, such as chisels, screwdriver, wash, brush, putty knife. For the second method, you’ll need a putty knife, and building dryer. If you have prepared all the tools, it is now necessary to remove the frames with the window opening, then rinse and thoroughly clean the paint from the frame.

Shpatlevanie will second action, or you can call it a second stage, restoration of wooden windows. For, to hide the existing large cracks on the frames, We need to use glue and using screws to fix them. The fine-grained sandpaper is ideal for polishing the frame after, Stopper it as you.

Further third stage — is painting the window frames. Painted window in different ways, both by spraying, and also a brush roller and. The choice of paint — a very important process, because of its quality will depend on the durability of the frames service.

Silicone seal the windows, which are inserted into the already inserted in its place in the window opening frame, Do not skimp on silicon, it will trap moisture, so she does not get inside.

Thermal insulation of old windows

This will help us modern materials. In the vast selection method and installation, considered the most reliable sealing of tubular form. Measured the width of the window frame and the window of the gap in the following way: in a plastic bag or film wrap a piece of clay and close the window. When selecting the width of the seal based on these sizes. When installing, do not stretch the tape, she must bear exactly. Secure the material with small nails or staple gun in length, that the tape was recorded, and when you open the window does not slip and is not moved from its place. These tips is enough, To make self-repairing old windows and insulate them. And as practice shows — wood windows are much longer than their plastic counterparts.

How to restore wood Windows: step by step instructions Bashny.Net

If you bought under the cottage old house with wooden Windows that look unattractive, do not rush to throw them away and buy new ones. You can own hands to restore the old frame and with the help of our tips and modern materials to turn a frog into a Princess. Restoration of wooden Windows — a laborious process. But it is much cheaper than putting new Windows. We will tell you how to restore the wooden window with his hands.

Restoration of wooden Windows with their hands. Dismantlingthe First step is dismantling. Often old private houses the window frames are simply inserted into the opening, and they can be removed with a tire iron. The main thing is to equally apply stress by moving the mount along the entire height of the window and on both sides below the window will not warp.

If you need to Unscrew the hinges, covered with paint, you can remove the paint from the screws, tapping with a hammer on the screwdriver. After that remove them will be much easier.

Glass must be removed. They usually hold a couple of small studs that is often hidden under the remnants of putty. To remove putty, there are special tools, but it is quite possible to do and an ordinary chisel.

Tip! Old putty will be removed easier if you warm it with a Hairdryer.

How to repair old windowAfter all the glass removed, you can begin to clean and restore wood surfaces. For paint removal, you can use construction Hairdryer.

Or special aggressive stripper for paint. It is applied to the surface, and it destroys the paint. But when you work with it you need to be careful — it is dangerous for the skin. Be sure to use gloves.

Now, when the paint is removed, you can fully assess the degree of damage to the window frame. Further actions depend on what picture you will discover.

If the tree is rotten, the rotten wood you want to remove. Further on the circumstances: if dents are small and can be putty, start putty. Sometimes the plaster may be carried out in several stages — it depends on the degree of damage.

The damage of medium size, with which the filler can not cope, you can make a filler from sawdust and PVA glue.

Fill this mixture in the damaged areas.

After the glue has dried with sawdust, zashpaklyuyte any small dents that are left.

If the decayed area is too large for putty and filler, you have to fill it with cubes, cut to size. They should be put on the glue and — if possible — in addition to nail or fasten screws.

After drying, the adhesive area should be putty regular putty for wood.

The next stage is cleaning. The frame should be thoroughly sanded.

Pay special attention to shpaklevaniem sites.

Restoration of wooden Windows. FinishBefore you start to finish, the surface should be degreased with white spirit or similar solvent. Alcohol is not suitable for it!

Then definitely primed the Windows.

Now the frame is ready for painting. If you are lucky and your Windows are not damaged, you can use a transparent paint.

Wood is a beautiful material, and wooden Windows, painted with transparent paint, look incredibly attractive. But even if you have to paint your Windows the usual opaque paint for wood, to hide the plaster and traces of repair, new Windows still can not be compared with them.

After painting the frame ready for glazing and return to its place, where it will last for many more years. Restoration of wood Windows requires considerable time and labor, but do not let that scare. The effort will return a hundredfold, because these Windows are much more environmentally friendly and attractive than modern plastic. In addition, the restoration will cost much less than buying and installing new Windows. published

P. S. And remember, only by changing their consumption — together we change the world! ©