Ошибка сокета 10013.

в Ошибки ПК 10.05.2018 0 1,051 Просмотров

Ошибки сокета возникают по разным причинам: от плохого сервера до отсутствия подключения к Интернету. Ошибка сокета 10013 происходит из-за отказа в доступе к серверу. Это происходит почти исключительно потому, что брандмауэр или антивирусная программа на компьютере пользователя установлены на высокий уровень безопасности, но это также может произойти, потому что есть несколько функций, связанных с одним и тем же драйвером, и это вызывает ошибку сокета. В первом случае ошибку легко исправить, но последняя сложнее. Пока ошибка сокета не будет разрешена, компьютер не сможет получить доступ к серверу.
Брандмауэры и антивирусные программы иногда являются причиной ошибки сокета, и в случае ошибки сокета 10013 они являются исключительной причиной такой ошибки. Брандмауэры созданы для защиты компьютера от вредоносных подключений, поэтому они часто ограничивают подключения к серверу. Это означает, что доступ к разрешениям будет категорически запрещен.

Если пользователь отключит брандмауэр, доступ к разрешению будет проходить – если брандмауэр является причиной отказа в доступе, но может раздражать пользователя, чтобы он продолжал включать и отключать брандмауэр, когда он или она хочет получить доступ к серверу. Лучший способ исправить это – проверить раздел «Разрешения» в программе и посмотреть, есть ли там сервер к которому вы подключаетесь. Если нет, обратитесь к поставщику услуг Интернета (ISP) и попросите о помощи в добавлении нового сервера в список.

Устаревшие драйверы также могут быть виновниками ошибки сокета 10013. Сервер больше не может использовать драйверы, поэтому разрешение не может быть предоставлено. Если это является причиной ошибки, выполните общее обновление драйверов компьютера, обычно это помогает устранить проблему. Если нет, проверьте веб-сайт производителя программного обеспечения для поиска новых драйверов и загрузите их на компьютер. Поврежденные драйверы также могут вызвать эту проблему, но обновление или загрузка новых драйверов должны устранить проблему аналогичным образом.

Самая сложная причина ошибки сокета 10013 заключается в том, что более одного драйвера или программы привязаны к одному и тому же драйверу. Это требует от пользователя доступа к коду драйвера и дифференциации двух или более программ. Часто бывает проще связаться с создателем программного обеспечения для получения справки о такой проблеме, поскольку создатель должен иметь возможность направлять пользователя через шаги, необходимые для дифференциации программ.

C++: Windows Socket Error 10013

All of a sudden, my PC has stopped letting me bind to sockets. It was working last night, and when I went to test a feature after a few hours of coding, nothing would bind.

• The same code works on my other PCs, so it’s clearly something unique to my main dev machine.
• A bind to TCP port 8080 (the app has a mini-HTTP server) does work.
• Other applications I’ve written that listen to the same 63000-range ports also fail on this computer.

Here’s some code that is failing:

• Disabling my Windows firewall (as suggested as the common fix)
• Disabling Windows Defender
• Running the app as administrator
• Rebooting
• Disabling/enabling my network drivers
• Renaming the app in question (in case the firewall was set to ban)
• Reverting to a known-good version of the app
• Trying some other known-good networking applications I’ve written (they also fail with 10013)
• Trying different ports in the same area
• Changing my network type from «public» to «home»

If I run netstat , there are no other applications using the ports I’m trying to listen on (generally TCP and UDP ports in and around the 63000 area). Doing another quick netstat check, the highest local port currently bound is 53843.

Pretty sure the only app I installed last night was Kerbal Space Program, which I can’t imagine has broken my net drivers.

Socket 10013 error when trying to connect some programs

I am trying to connect Pokerstars form my laptop but I am getting a socket 10013 connection error. How do I fix this?
Windows 7, 64 bit, laptop.
wireless internet with router.
up to date drivers

what I have done so far:
restarted laptop, refreshed modem and router
allowed access from windows firewall for the program for outgoing and incoming connections, for private and public domains. (my network is public as I live on a farm)
turned off windows firewall to check if it works (doesn’t). turned back on.
I can access internet from internet explorer, msn messenger and some programs. I downloaded the install file, but when I click on the program to start it I get this connection error. My husband is running the same program from his wireless laptop with no problems (vista). Here is the log file from the program if that helps.

Starting update — ver. 1.47
Requested _update2.dat
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 1 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 2 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 3 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 4 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Update done with code -2, err -87
FW: ‘(null)’
[2010/03/16 03:48:54]
VC++ __active_heap = 1
HeapQueryInformation=0
GetProcessAffinityMask=0x00000003
tryLock supported
Work dir set to ‘C:\Users\Jill\AppData\Local\PokerStars.NET\’
Reading ini file.
catch user.ini .
CmdLine »
Starting update — ver. 1.47
Requested _update2.dat
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 1 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 2 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 3 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 4 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Update done with code -2, err -87
FW: ‘(null)’
[2010/03/16 03:48:59]
VC++ __active_heap = 1
HeapQueryInformation=0
GetProcessAffinityMask=0x00000003
tryLock supported
Work dir set to ‘C:\Users\Jill\AppData\Local\PokerStars.NET\’
Reading ini file.
catch user.ini .
CmdLine »
Starting update — ver. 1.47
Requested _update2.dat
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 1 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 2 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’ (attempt 3 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://updatepm.pokerstars.net/galaxy.gz.ver3466/_update2.dat’: -87
Downloading ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’ (attempt 4 of 4).
Finding host.
Contacting host.
Error in sock.connect(): ‘Unable to connect: An attempt was made to access a socket in a way forbidden by its access permissions. (10013=0x271D)’
Error loading file ‘http://77.87.180.177/galaxy.gz.ver3466/_update2.dat’: -87
Update done with code -2, err -87
FW: ‘(null)’

thanks in advance for your help.
JBotterill

A Guide to Quick Fixing Error 10013

Repair Error 10013

Error 10013 — What is it?

Error 10013 is a type of a Socket Windows PC error. Socket error 10013 occurs when the attempt to access the server is denied. This indicates that the needed socket connection is denied which further implies that a port is blocked or unreachable.

Solution

Download Available to Completely Repair Error 10013

Recommended: Download the Automatic Repair Utility to correct this and other PC performance issues.

Certified safe, virus free download. Error Tools Editor’s Choice.

Error Causes

The socket error 10013 can occur due to multiple reasons:

• Antivirus or firewall software
• Incompatible drivers
• Registry corruption
• Misconfigured files

Further Information and Manual Repair

To resolve the socket error 10013 on your PC, here are some methods that you can try:

1. Disable Firewall

To resolve this issue on your PC, you may have to temporarily disable Firewall. Sometimes Firewall can stop you from connecting to the server. Try doing this; it is most likely to resolve the error. If the Firewall is the reason for the denied access, turning it off will surely help.

2. Disable your Antivirus Software

If disabling Firewall doesn’t resolve the issue, try disabling your antivirus software temporarily. If the error still persists, then try other solutions listed below.

3. Upgrade Drivers

Incompatible drivers could be a reason too for denied server access.

Your server may no longer be using the drivers that you have on your PC which is why you may not be getting permission to access it. If this is the cause, then the best way to resolve it is to upgrade drivers. To find out about new drivers, visit the software manufacturer’s website for new drivers and then download them to your PC.

4. Registry Issues

Sometimes the underlying cause of the error could be registry issues and mis-configured files.

If you don’t wipe out unnecessary and obsolete files from your system like the junk files, cookies, internet history, temporary files and other files from your PC, it can damage and corrupt the registry and mis-configure files thereby causing socket error 10013 on your system.

To resolve registry issues and repair your PC, download Total System Care. TSC is an advanced, easy to use and a highly functional PC fixer embedded with multiple utilities including a powerful registry cleaner. It is deployed with an intuitive algorithm which scans and detects all registry issues in seconds.

It removes all the unnecessary and obsolete files stored in your PC overloading your registry. This registry cleaner repairs the damaged and mis-configured files and restores the registry, thereby resolving socket error 10013 on your system right away.

It has simple navigations and a user-friendly interface which makes it very easy for all levels of users to work around and use it to its maximum advantage. Furthermore, it can be installed on all Windows PC.

Total System Care is compatible on all Windows versions such as Windows 7, 8, Vista and also XP.

In addition to this, it also includes several other value added features such as an antivirus, a system optimizer and an Active X controls and class scanner. These utilities can be used to resolve numerous other PC related errors.

Click here to download Total System Care today and resolve socket error 10013 on your PC right away.

How to Install Total System Care & Fix PC Errors (VIDEO)

How to Fix Socket Error 10013

Repair Error 10013

Socket Error 10013 — What is it?

Socket error 10013 is an error code that often pops on the screen when you try to access the server. This error code restricts your permission to access. It shows that your permission request was denied.

The error message is displayed in the following format:

“Socket.error: [Errno 10013] an attempt was made to access a socket in a way forbidden by its access permissions”

Solution

Download Available to Completely Repair Error 10013

Recommended: Download the Automatic Repair Utility to correct this and other PC performance issues.

Certified safe, virus free download. Error Tools Editor’s Choice.

Error Causes

Narrowing down a particular reason for the cause of socket error 10013 is difficult, typically because this error code can be generated due to several reasons. Here are some of the common reasons for its occurrence on your PC:

• High security set up- Firewall or an antivirus program
• Too many functions tied to the same driver which confuses the socket
• Outdated drivers
• Malware

The good news is that the socket error 10013 is not fatal. However, it is advisable to fix and resolve the issue to avoid inconvenience.

Further Information and Manual Repair

Here are some of the best, quickest and easiest methods to work around the problem and resolve socket error 10013 without any hassle or delay.

Method 1 – Turn off Firewall

Believe it or not, high level of internet security measures like Firewalls and anti-virus programs are a common cause of socket error 10013.

Firewalls are made to protect a computer from harmful connections but sometimes it may also restrict server connections, considering them as a threat to your system security.

Due to this, permission access is adamantly denied. To resolve this issue on your PC, the best way to go about is to turn off your Firewall or any other anti-virus programs installed on your system.

Once you turn off these programs, try accessing the server again. Majority of the times the issue is resolved by carrying this step. Nonetheless, if the error still persists, try the methods given below.

Method 2 – Check the Permissions section of the Firewall Program

Another way to resolve is to check the permission section of the Firewall program and check for the server. If the server is not listed, contact the Internet Service Provider (ISP) and ask for help in adding the server to the list.

Method 3 – Update Drivers

Outdated driver may sometimes be the reason for the socket error 10013. The socket may no longer use the drivers installed on your PC which is why permission to access the server is not granted.

When this is the reason, try updating the drivers to resolve. For new drivers, visit the software manufacturers’ website, download and install.

Method 4 – Scan for Viruses and Malware

Another alternative is to scan for viruses and malware. Sometimes the cause for the error is viral infection. Therefore, remove them to resolve.

The best way is to download Total System Care. This is a user-friendly and a next generation PC Fixer embedded with 6 scanners including a powerful anti-virus. It scans your entire PC and removes all types of viruses including malware, adware, spyware and Trojans in seconds.