Утилита airport для mac os catalina

Apple AirPort Utility for Mac

AirPort Utility 6.3.1 LATEST

Mac OS X 10.5 or later

Apple AirPort Utility for Mac 2021 full offline installer setup for Mac

When you want to give wireless internet access to other people in your classroom or house, the Apple AirPort Utility for Mac makes it easier than ever. It allows you to wirelessly connect multiple devices and computers to the internet. Basically, without needing any cables, you can create a network and allow all these devices to wirelessly communicate with each other. All you need to do is configure the AirPort Utility software on your computer appropriately.

Once your computer is configured, you can establish an AirPort Base Station or gain access to an existing AirPort network. The wireless connection that gets established needs to pass through an AirPort Base Station that is already online. The AirPort Utility will not create a direct internet connection with your existing ISP (Internet Service Provider). It will simply transfer the connection to all the nearby rooms in your house or classroom.

It is very simple to create a wireless network with password protection by using either an AirPort Base Station or Time Capsule. This network will give internet access to all kinds of wireless devices in the nearby rooms, including smartphones, laptops, tablets, and regular desktop computers.

Do not worry about having to set up AirPort Express or AirPort Base Station because the AirPort Utility software for macOS will handle all of this automatically. It will even perform the configuration of your network too. This means the base station just needs to be plugged in. After that, all the stations that are available will be listed in the main interface.

If you are familiar with routers, these AirPort Base Stations work kind of like them. You just connect the cables and then let the network be configured automatically by the application. As for Time Capsule, this refers to the combination of a gateway router and a wireless device. This makes its configuration very easy too.

Overall, the most dependable application for giving wireless internet access to other devices is Apple AirPort Utility for Mac. Every device in your home can establish a connection to your wireless internet network. An external cable doesn’t even need to be used.

Источник

Настройка базовой станции AirPort на Mac

Базовую станцию AirPort Express, AirPort Extreme или AirPort Time Capsule можно настроить для совместного использования широкополосного доступа к Интернету с компьютерами в Вашей беспроводной сети и для совместного использования USB-принтера.

Можно также настроить AirPort Express для воспроизведения музыки через стереосистему или активные динамики посредством AirPlay.

Подключите необходимые кабели к базовой станции.

Подключение к Интернету. Подсоедините кабель Ethernet от кабельного или DSL-модема к порту Ethernet WAN на базовой станции.

Общий доступ к USB-принтеру. Подсоедините USB-кабель от совместимого USB-принтера к USB-порту на базовой станции.

Использование AirPlay для воспроизведения музыки через AirPort Express. Подключите аудиокабель от стереосистемы к аудиоразъему «мини-джек» на AirPort Express.

Включите вилку питания устройства в электрическую розетку.

На компьютере Mac нажмите значок состояния Wi-Fi в строке меню и выберите устройство.

Открывается Утилита AirPort. Для настройки беспроводного устройства выполните инструкции на экране.

AirPort Express совместим с динамиками с автономным питанием, подключенными к аудиоразъему «mini-jack». Вы не сможете использовать динамики с питанием по USB с AirPort Express.

Для получения дополнительных сведений о применении AirPort откройте приложение «Утилита AirPort», затем выберите «Справка» > «Справка Утилиты AirPort».

Источник

How-to: Set time limits on your Wi-Fi network using AirPort Utility

— Oct. 6th 2013 2:00 am PT

AirPort Utility is a built-in Mac app that is used to configure and control Wi-Fi networks using Apple’s AirPort Extreme, AirPort Express, and Time Capsule. The AirPort Extreme is a base station router like you would use when setting up your Wi-Fi network. An AirPort Express is used to extend a Wi-Fi network to a larger area, or can be used to stream audio using AirPlay. A Time Capsule is a combination of an AirPort Extreme and an external hard drive, and comes in 2 TB or 3 TB. It automatically backs up all Macs on your network.

AirPort Utility has the ability to set limits on what time of day the network (and therefore the internet) can be accessed from specific wireless devices. This can be helpful in situations where parents want to keep kids off of the internet after a certain time. Time limits can be set for different times on different days of the week.

LEGO Marvel 2022 sets: Thor: Love and Thunder, Wakanda Forever, Multiverse of Madness, more

Finally upgrade to Wi-Fi 6 with TP-Link’s AX3000 router at low of $99 shipped (Save $30)

Save 50% on LEGO’s new 1,700-piece Harry Potter and Hermione figure set

This sleek RFID-blocking wallet keeps your cards neat and safe at low of $16 (Save 38%)

Wyze Cam V3 delivers an affordable smart home upgrade at 2021 low of $30 (Reg. $36)

Airport Utility Stories July 11, 2013

Apple pushes bug fix updates to AirPort Utility on iOS, OS X & Mavericks Recovery mode

Mark Gurman — Jul. 11th 2013 1:20 pm PT

Apple has issued a minor bug fix update to both AirPort Utility on OS X and on iOS. The OS X Update is available via Software Update on the Mac App Store, while the iOS version is in the App Store on iOS and iTunes.

The update, on both platforms, is to squash a bug for AirPort Base Stations not begin recognized by the app. Apple, last month, pushed out AirPort Utility updates to add compatibility for the new 802.11ac AirPort Extreme and AirPort Time Capsules.

In OS X Mavericks-specific news, Apple has pushed out an update to testers for the OS X Recovery function. Thanks, D!

Airport Utility Stories February 11, 2013

Apple Airport/Time Capsule 7.6.3 update breaks IPv6 tunneling, fix is downgrading

Jordan Kahn — Feb. 11th 2013 8:07 am PT

A number of users on Apple’s support forums noticed that the latest Airport/Time Capsule 7.6.3 firmware released last week seems to disable IPv6 tunneling on various devices. It isn’t a big surprise to many users that have experienced the functionality being disabled with past versions of the firmware, and it will likely be fixed in a future release. You can revert to a previous version of the firmware until Apple fixes the issue by using the instructions below:

1. Open AirPort Utility.
2. Select your base station and choose Manual Setup, or double-click on the Wi-Fi base station icon.
3. Choose Base Station > Upload Firmware…
4. From the window that appears, select a firmware version and click OK. If you select Other from the Upload Version menu, you will be prompted to manually locate the firmware update.

1. Open AirPort Utility.
2. Select the base station you want to downgrade.
3. Place the mouse cursor over the version number and hold down the Option key to turn it into a pop-up menu. Press and hold the mouse button to open the menu.
4. From the menu that appears, select a firmware version and click OK. If you select Other, you will be prompted to manually locate the firmware update.

Airport Utility Stories June 27, 2011

Time Capsules accept user 3TB drives?

— Jun. 27th 2011 3:22 am PT

Apple last week bumped up its Time Capsule wireless backup appliance to 2TB and 3TB models, priced the same $299 and $499, respectively. In addition, Apple appears to be now using consumer public drives from Western Digital (bumped up from Hitachi Deskstar drives). That, plus the $499 price point puts the new 3TB Time Capsule pretty much out of reach on price-conscious buyers. In fact, you’re better off, as we explained, hooking up an external USB drive to your 1TB Time Capsule.

But if you hate the clutter and yearn for a sealed, elegant solution with only one plug, you needn’t pony up $200 extra for a 3TB Time Capsule: It would seem that the wireless gizmo accepts 3TB internal drives, if properly partitioned. According to a HardMac reader:

I personally installed a 3 TB WD Caviar Green 3To (by chance!), when it came out 5 months ago, in a 1 TB Time Capsule that I bought around that time as well. I formatted it with Airport Utility to have the 3 partitions that are necessary for Time Machine and it was immediately recognized as a 3 TB disk. I’ve been using it ever since without any problem.

Источник

AirPort Utility 4+

Apple

Screenshots

Description

Use AirPort Utility to manage your Wi-Fi network and AirPort base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule — right from your iPad, iPhone, or iPod touch. See a graphical overview of your Wi-Fi network and devices. Change base station and network settings, or manage advanced features such as security modes, wireless channels, IPv6 configuration, and more.

AirPort Utility works with all Apple 802.11n and 802.11ac Wi-Fi base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule.

Features
• See a graphical overview of your Wi-Fi network
• Get information about your connected Wi-Fi devices
• View and change network and Wi-Fi settings
• Restart or restore a base station, or update the firmware on a base station when available
• View or update passwords for your network, base stations, or disks
• Easily access network information such as IP address, DNS servers, and router address
• Manage DHCP reservations and port mappings
• Configure base stations for IPv6
• View status or error messages
• Archive Time Machine backups

What’s New

This update includes general stability and security improvements

Ratings and Reviews

Workable but Ripe for a Redesign

This app allows interfacing with the AirPort, which is helpful. However, the interface is not especially intuitive and this really shows up in the design/setup for limiting wifi access. I want to program in when my kid can’t get wifi on their phone and laptop. This is possible but awkward, requiring many clicks. Once one gets to the point of programming the access restriction, it is actually a bit confusing whether one is delineating times wifi is allowed or not allowed. Also, it is set on a 24 hour day, so there is not one easy way to say no wifi all night, starting at 10pm on one day and going till 7am the next. One must program 10p-11:59 then 12am to 7am on a separate «restriction.» Some better, more visually intuitive examples of setting up access restrictions and permissions exist in other areas — this piece needs work. I also would like to be able to have a quick way to force wifi off for my kid’s tech quickly and easily, like «stop access now and for the next x hours, just this one time» or similar. This app does not provide anything even close that sort of immediacy. Finally, when we are using access restrictions for one or two devices, it somehow seems to gum up the works for every other device in the house as well.

OH NO, I didn’t mean to update!

I’ve been using this app to manage my AirPort Extreme for years. It’s not the most in-depth router management tool but, it’s the only router management tool available to manage an Apple Airport product.
I had no intentions on upgrading/updating this app. on my iPad, which is what I use for pretty much everything apple based on the terrible reviews this update 1.3.6 was getting. Unfortunately I accidentally did update the app while I was updating other apps.

Once I realized what I’d done, with great hesitation I launched the app and held my breath. it seemed to launch normally, in fact it was fine! After testing several features I could not find any issues or even any changes. The WiFi scanner is still present and works fine, (I’d seen a few comments saying the upgrade broke or removed the WiFi scanner). I went through several areas in the app, NAT setting, port forwarding, etc. everything works fine. if I didn’t know I updated the app I wouldn’t be able to tell the difference between the two versions. Apple has stopped supporting all things Apple Airport but as of this review are still selling airport products. Apple’s not exercising Best Practices in my humble opinion but everyone knows the Apple knows what’s best for us, the Apple is here to help us, the Apple will keep you safe, the Apple is good, trust the Apple.

but seriously, the update works just fine for me.

Not compatible despite claims

At some point a few versions ago, this app started telling me it no longer works with my iPod Touch 5th generation, presumably because iOS won’t update. There’s nothing this app does that should need an OS update IMO and I’m not going to just toss it on the trash when it still works, but at the very least Apple could do a version check BEFORE telling me there’s an update available. There is no way to clear this off the update list! It keeps telling me there’s a newer version available, but gives then says it doesn’t work on this iPod Touch. I tried to report this to Apple, but it wanted to install a support app instead first, which is ridiculous just to send a text message to support and probably won’t work on this iPod Touch anyway. Apple makes it too difficult to report problems these days, probably because they don’t want to hear about them. I can’t see myself buying an iPod Touch ever again given how long they last, but get dumped for software support so quickly, more from Apple apps than 3rd party even. How new an OS do you need to check WiFi routers they no longer even make. It’s ridiculous!

Источник