Samsung m2020 ������� ��� linux

Samsung Xpress SL-M2020 driver

The Samsung Xpress SL-M2020 printer model is a classic choice of device for average print work for efficient productivity. For instance, the rate of printing in black at the normal mode is up to 20 pages per minute (ppm). Also, it produces its first page from the active style as fast as 8.5 seconds. But when the printer is waking up from the sleep mode, the rate of printing the first page is about 15 seconds. Furthermore, the best print quality for black printing as well is up to 1200 x 1200 dots per inch (dpi).

Samsung Xpress SL-M2020 printer driver Supported Windows Operating Systems

Supported OS: Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit, Windows XP 64-bit
Filename	Size
Easy Eco Driver for Windows 10 8.1 8 7 vista xp 32 bit and 64 bit.exe	10.45 MB	Download
Print Driver for Windows 10 8.1 8 7 vista xp 32 bit and 64 bit.exe	32.97 MB	Download
Universal Print Driver for Windows 10 8.1 8 7 vista xp 32 bit and 64 bit.exe	25.32 MB	Download

Samsung Xpress SL-M2020 driver Supported Macintosh Operating Systems

Supported OS: macOS Mojave 10.14.x, macOS High Sierra 10.13.x, macOS Sierra 10.12.x, Mac OS X El Capitan 10.11.x, Mac OS X Yosemite 10.10.x, Mac OS X Mavericks 10.9.x, Mac OS X Mountain Lion 10.8.x, Mac OS X Lion 10.7.x, Mac OS X Snow Leopard 10.6.x, Mac OS X Leopard 10.5.x
Filename	Size
Print Driver for Mac 10.5 to 10.14.zip	22.96 MB	Download

Samsung Xpress SL-M2020 driver Supported Linux Operating Systems

Linux (32-bit), Linux (64-bit)

Supported OS: Debian os, Fedora os, Red Hat Enterprise Linux os, SUSE Linux os, Linux Mint os, Ubuntu os, Open SUSE
Filename	Size
Print Driver for Linux.tar.gz	14.73 MB	Download

Specifications

This machine achieves its print quality through the aid of the rendered engine for clean pages (ReCP) technology. Whereas, its duty cycle when printing on an A4 is up to 10,000 pages in a single month. But the manufacturer recommends a monthly range between 100 and 1500 pages for perfect condition. Also, the inbuilt processor runs at a speed of 400 MHz for efficient productivity. It also supports the use of the Samsung Printer Language (SPL) as a typical print emulation for it.

When the machine runs out of the packaged cartridge, the replacement options include a standard toner cartridge of 1000 pages yield. Also, there is a high yield toner cartridge with an approximate yield of 1800 pages. The choice of connection to the machine is through the standard USB 2.0 hi-speed port. Also, in addition to the processor, the device has a standard internal memory of 8MB, which is the maximum capacity.

The standard input tray paper capacity is up to 150 sheets of plain paper with an average weight of 20 lbs. But the output tray will only accommodate 100 sheets of plain paper at maximum output. This machine also works with a manual duplexer for adequate support for optimum performance. Download Samsung Xpress SL-M2020 driver from HP website

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Installing Samsung M2020 printer

Installing Samsung M2020 printer

Post by Deon58 » Wed May 03, 2017 11:41 am

I have searched and found some info but as I have very recently switched over to Mint I am at a bit of a loss.

I plug my printer in and it comes up as a printer but then says it is missing /usr/lib/cups/filter/rastertospl

I did see somewhere to copy it to the user directory but can’t copy and paste.

I would really appreciate some support starting with the premise that I know nothing

Thanking you in advance

PS. I include screen-shots of messages

Re: Installing Samsung M2020 printer

Post by richyrich » Wed May 03, 2017 12:11 pm

I can only find the m2020w at openprinting.org . . Is that your’s ?

If so, the comment near the bottom may give you some directions.
Ref: http://www.openprinting.org/printer/Sam . ung-m2020w

Re: Installing Samsung M2020 printer

Post by kukamuumuka » Wed May 03, 2017 1:56 pm

Installation:
Extract the package and go to the uld folder, where open Terminal and run

Re: Installing Samsung M2020 printer

Post by Deon58 » Thu May 04, 2017 2:50 pm

Many thanks for the reply. I downloaded and extracted driver. Went to uld and ran install.sh by double clicking on file name. It asked me if I wanted to run and sais yes. Plugged in printer and after saying installing new printer gave message no driver.

Am I missing something. Do I need to open a terminal window and type in an install command there?

Installation:
Extract the package and go to the uld folder, where open Terminal and run

Re: Installing Samsung M2020 printer

Post by kukamuumuka » Thu May 04, 2017 2:58 pm

Deon58 wrote: Hi there,

Many thanks for the reply. I downloaded and extracted driver. Went to uld and ran install.sh by double clicking on file name. It asked me if I wanted to run and sais yes. Plugged in printer and after saying installing new printer gave message no driver.

Am I missing something. Do I need to open a terminal window and type in an install command there?

Re: Installing Samsung M2020 printer

Post by richyrich » Thu May 04, 2017 3:01 pm

Did it ask you for your password ? If NO, then it didn’t work. You need superuser/root privilege to install the driver.

The sudo install.sh terminal command will do this, it will ask for your password.
When you type your password, nothing will show, no asterisks, no moving cursor, nothing! This is normal, just type your password and then hit the Enter key.

Re: Installing Samsung M2020 printer

Post by Deon58 » Thu May 04, 2017 3:40 pm

I tried to run the command in terminal and this is the result

Thank you again

Did it ask you for your password ? If NO, then it didn’t work. You need superuser/root privilege to install the driver.

The sudo install.sh terminal command will do this, it will ask for your password.
When you type your password, nothing will show, no asterisks, no moving cursor, nothing! This is normal, just type your password and then hit the Enter key.

Re: Installing Samsung M2020 printer

Post by kukamuumuka » Thu May 04, 2017 3:44 pm

Deon58 wrote: Hi there

I tried to run the command in terminal and this is the result

Thank you againScreenshot from 2017-05-04 21-38-46.png

Re: Installing Samsung M2020 printer

Post by Deon58 » Thu May 04, 2017 4:42 pm

This still comes up

Deon58 wrote: Hi there

I tried to run the command in terminal and this is the result

Thank you againScreenshot from 2017-05-04 21-38-46.png

Re: Installing Samsung M2020 printer

Post by austin.texas » Thu May 04, 2017 5:01 pm

Re: Installing Samsung M2020 printer

Post by richyrich » Thu May 04, 2017 5:04 pm

Re: Installing Samsung M2020 printer

Post by pdc_2 » Fri May 05, 2017 3:49 pm

so the Unified Linux Driver comes down as uld_v1.00.36_00.91.tar.gz from the site quoted earlier

so from the very beginning, if one opened a terminal and pasted in these commands, it should work . to paste into a terminal, right-click at the text prompt . flashing light and look for the PASTE option that should appear in the menu ..

and when it asks you for your sudo password, then please enter it

seems like this ML-2020W is a newish printer; part of what Samsung call the Express range; http://www.samsung.com/us/computing/pri . 2020w-xaa/

___________
Samsung have made their ULD (unified linux driver) for quite a few years now; they have earned praise for providing a linux driver; some have quibbled with where their installer puts files; so some linux enthusiasts have supported this alternate site http://www.bchemnet.com/suldr/index.html .

ideally most older Samsung printers seem to auto-install; the driver that is in Synaptic called printer-driver-splix usually provides the support and Mint auto-installs the older printers
_____________

this 2020W has Google Cloud Print capabilities; so one can just print using that; one should not need to install drivers if that was the sole way of sending data to print; similarly using a mobile phone

Re: Installing Samsung M2020 printer

Post by Deon58 » Sat May 06, 2017 4:01 pm

Re: Installing Samsung M2020 printer

Post by Maury Lee » Sat Jun 01, 2019 10:47 pm

Источник

Служба поддержки HP — Загрузки ПО и драйверов

hp-detect-load-my-device-portlet

hp-contact-secondary-navigation-portlet

Выберите свою модель

Поиск продукта с помощью HP

HP может определить большинство продуктов и возможных рекомендованных решений HP.

hp-hero-support-search

Помощь по поиску

Советы для улучшения результатов поиска

• Проверьте орфографию и расстановку пробелов — Примеры: «замятие бумаги»
• Используйте имя модели продукта: — Примеры: laserjet pro p1102, DeskJet 2130
• Для продуктов HP введите серийный номер или номер продукта. — Примеры: HU265BM18V, LG534UA
• Для продуктов Samsung Print введите К/М или код модели, указанный на этикетке продукта. — Примеры: «SL-M2020W/XAA»
• Добавьте ключевые слова вместе с названием продукта. Примеры: «LaserJet Pro M1132 замятие бумаги», «HP 250 G5 bluetooth»

Требуется помощь в поиске названия продукта, номера или серийного номера?

hp-share-print-widget-portlet

Установите доступный 64-разрядный драйвер Samsung для печати / сканирования / факса или воспользуйтесь AirPrint & Image Capture

Найдите часто задаваемые вопросы и ответы здесь.

Устраните проблемы с компьютерами и принтерами HP, связанные с обновлением Windows 10. Нажмите сюда

Получите быстрый доступ к материалам поддержки HP, управляйте устройствами в одном месте, ознакомьтесь с информацией о гарантии и многое другое. Создать аккаунт HP

hp-miscellaneous-portlet

hp-product-information-portlet

ПО и драйверы для

Лазерный принтер Samsung Xpress SL-M2020

hp-software-driver-metadata-portlet

Помощник по загрузке и установке

Для получения наилучших результатов мы рекомендуем вам использовать наш Помощник по загрузке и установке.

Помощник по загрузке и установке

Загрузка HP Support Solutions

Помощник по загрузке и установке

Коллекция решений и диагностических данных

Данное средство обнаружения продуктов устанавливает на устройство Microsoft Windows программное,которое позволяет HP обнаруживать продукты HP и Compaq и выполнять сбор данных о них для обеспечения быстрого доступа информации поддержке решениям Сбор тех. данных по поддерживаемым продуктам, которые используются для определения продуктов, предоставления соответствующих решений и автообновления этого средства, а также помогают повышать качество продуктов, решений, услуг и удобства пользования.

Примечание: Это средство поддерживается только на компьютерах под управлением ОС Microsoft Windows. С помощью этого средства можно обнаружить компьютеры и принтеры HP.

• Операционная система
• Версия браузера
• Поставщик компьютера
• Имя/номер продукта
• Серийный номер
• Порт подключения
• Описание драйвера/устройства
• Конфигурация компьютера и/или принтера
• Диагностика оборудования и ПО
• Чернила HP/отличные от HP и/или тонер HP/отличный от HP
• Число напечатанных страниц

Сведения об установленном ПО:

• HP Support Solutions Framework: служба Windows, веб-сервер localhost и ПО

Удаление установленного ПО:

• Удалите платформу решений службы поддержки HP с помощью программ установки/удаления на компьютере.

• Операционная система: Windows 7, Windows 8, Windows 8.1, Windows 10
• Браузер: Google Chrome 10+, Internet Explorer (IE)10.0+ и Firefox 3.6.x, 12.0+

Источник