Драйвер для ROLAND QUAD CAPTURE-UA55

/
Windows 10		1.5.2	0.1 [MB]	Скачать
Windows 8.1 / 8 / 7 / Vista / XP		1.5.2	12 [MB]	Скачать
MAC OS X 10.9/10.8/10.7/10.6/10.5/10.4		1.5.2	7.2 [MB]	Скачать
MAC OS X 10.10/10.11		1.5.2	1.3 [MB]	Скачать

Перед загрузкой прочтите и примите Лицензию Roland .

Драйверы для ROLAND QUAD CAPTURE-UA55 под Windows 10 / 8.1 / 8 / 7 / Vista / XP и MAC OS X 10.11/10.10/10.9/10.8/10.7/10.6/10.5/10.4.

Для Windows 8.1/8/7/Vista/XP и для MAC OS X 10.10/10.11 желательно удалить старую версию драйвера перед установкой нового.

Для Windows 10 драйвер должен автоматом загрузиться через Центр Обновления при подключении устройства. Если этого не произошло — смотрите эту статью.

Roland QUAD-CAPTURE подключается к порту USB с поддержкой стандарта 2.0. Если у вас порт USB 3.0 без поддержки стандарта 2.0 — устройство не будет работать.

Производитель рекомендует использовать QUAD-CAPTURE с компьютерами укомплектованными чипсетами Intel.

Roland quad capture драйвер для windows 10

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

Your computer automatically downloads the Windows(R) 10 driver from the Internet when a product requiring the driver is connected to the computer.
For detailed information about the driver, check «Download File» at the bottom of this page.

* Under normal conditions, the driver installation is completed in several minutes. It may take about 10 minutes depending on the Internet connectivity or if there are other drivers being installed for other devices.
* A problem may have occurred if the device is connected but cannot be used after waiting for 10 minutes. Download the detailed information for the driver and refer to «Troubleshooting.»

Windows-compatible PC equipped with USB port

* Intel chipset is recommended.
* The device may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, the performance of the product will not change.

* This driver cannot be used in a virtual Windows environment, such as Hyper-V or Virtual PC.
* Mac computers running Microsoft Windows are not supported.

KVR Audio

Pro Audio Forum — VST, AU, AAX Plugin and Audio Software Discussion

Quad capture Windows 10 64 bit

Post by UliH » Sat Dec 10, 2016 4:46 pm

I have an installation problem with the Roland quad capture on Windows 10 64 bit. The installation process stops at once with the error Code 28. It is listed in the device Manager with the yellow exclamation mark. I tried the Windows 8 driver but even manually with administrator and compatibility mode no luck.
It worked fine in Windows 7 Pro 64 bit.

Any help appreciated

Post by Aloysius » Sat Dec 10, 2016 4:59 pm

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

In the Knowledge Base, there is an entry:

QUAD-CAPTURE, UA-55: SYMPTOM: Driver Will Not Install (Windows 10)

40 posts since 16 Nov, 2006

Post by UliH » Sat Dec 10, 2016 5:41 pm

Tanks for the reply I already visited the links

First link:
The problem is that it only contains information not the link to the WIn 10 driver the driver should install automatically on Win 10.
«This contains information on the QUAD-CAPTURE driver compatible with Microsoft Windows 10» not the driver.

Second didn’t help.

40 posts since 16 Nov, 2006

Post by UliH » Sun Dec 11, 2016 4:06 pm

I tried Quad Capture on a different system (Notebook Win10 64 bit), at first I got the same problem, but I got it to work when I search for new drivers out of the device manger, but that option does not work on the desktop system. So if anybody on a Win 10 system had the same problem and solved it, please let me know.

Thanks again for any help

Post by BiancoAngelo » Fri Dec 06, 2019 12:43 pm

I’ve been looking for this driver during long hours.
I got it from Roland and put it online, because nobody did it before apparently.