Репозитории kali linux добавить non free firmware

Репозитории kali linux добавить non free firmware

The topic of repositories is always a large one, and comes up frequently. It is an item which people often get wrong and confused with. Please take the time to read the information below and any references which is linked to before acting on anything.

Default Network Repository Value

On a standard, clean install of Kali Linux, with network access, you should have the following entry present in /etc/apt/sources.list :

If the output doesn’t exactly match up to the above output, you may not be able to install any new additional packages or receive updates. This may happen for any number of reasons, such as:

• You have switched your branch.
• Using a different hardcoded mirror.

You will probably want to read the “switching branches” section to alter this.

Since Kali 2020.3, after Kali’s setup is complete, network repositories will be enabled by default, even if there was no network access during installation.

Switching Branches/Regular Repositories

Kali has various different branches to choose from (please take the time to read which one would be the best option for your setup), and you may be able to switch or include additional repositories.

kali-rolling (Default & frequently updated):

kali-last-snapshot (Point release so more “stable” & the “safest”):

kali-experimental (Packages which are under testing — often used with the rolling repository):

Sources.list Format

• Archive is going to be deb (Regular Binary) or deb-src (Source), depending if you want a package or the source of the package.
• Mirror should be http.kali.org/kali as this is our load balancer, which will direct you to best mirror.
• Branch is what version of Kali you wish to use.
• Component is what packages you wish to use, based on the Debian Free Software Guidelines (DFSG). Kali defaults to everything.

Default Offline Install Values

During the Kali setup process, if you don’t have access to a network connection to reach a repository, you will perform an offline installation of Kali Linux. You will be limited to the packages & the version which is on the medium you installed Kali from. This will then configure Kali to continue to use this medium to install packages from, even after Kali has been installed.

This means you will not get any updates to packages, or any new additional tools, which can be frustrating. You can see if you the offline media enabled if your values match up with whats below (or if you want to enable this option):

If your output matches whats above, please see the switching branch section, if you wish to receive updates.

However, if you do have network connection, which has access to network repositories, it will be enabled for you. You don’t need to do anything.

Non-Kali Repositories

If you want to install additional tools and software (such as signal) outside of what Kali has to offer, you may need to include an extra repository for this to happen. Please do not alter /etc/apt/sources.list , as this is used for the Kali Linux Operating System. Any extra tools and software needs to be placed into their own file in the directory /etc/apt/sources.list.d/ (such as /etc/apt/sources.list.d/repo-name.list , replacing repo-name with the mirror name). It is highly recommended that each mirror should be in its own file.

By adding Kali’s repository to a non-Kali OS (such as trying to add Kali to Ubuntu), this will highly increase the chance of your system not working. It may not happen straight away, but without any warning, it may break. We will not be able to offer support (and based on what we have seen over the years, most other OS will not help too).

Likewise, adding other operating system’s repositories into Kali (such as trying to put Ubuntu on Kali), will break your installation. This is the single most common reason why Kali Linux systems break.

If any guides are telling you to do anything else than the above, this is unofficial advice, and completely not supported by Kali Linux. More often than not, users in this case end up doing a reinstall after learning this lesson.

Mirrors

We have a list of official Kali Linux mirrors, as well as a guide on how to setup your own. This may be kept as a local repository which is only accessible on a LAN, or a remote private one, or if you have the ability to, you may wish to share back to the community and make it public allowing for anyone else in your geographical area to benefit from it.

Source Repositories

By using a deb in the repositories, it will allow for binary packages to be downloaded. However, should you require the source to a package (so you can compile the package yourself if you so wish, or look into debugging a problem with a package), you can add deb-src as a extra line in the repositories.

We used kali-rolling for the branch above, but you can select any value you wish.

Updated on: 2021-Sep-27
Author: g0tmi1k

Источник

Репозитории kali linux добавить non free firmware

Copy raw contents

some missing files after the OS installation. here is a guide to check if you can install wifi drivers for Kali-linux.

boot using the bootable pendrive and see if kali live usb can boot or not and when it does,see if you can connect to the internet using wifi,if so then you can most probably install and use kali without any issue. reboot again> choose graphic installation and then start selecting language and region and .. automatically kali finds drivers.then usually the first part that needs to find wifi driver fails,dont waste time trying to fix this,keep on clicking next, the important part is where you want to partition the HDD.only use 1 partition and choose it manually to figure it out.I used 140gb HDD unallocated partition.I selected to do it manually,it created a 4gb and the rest of the140 gb (4gb for boot). when finished.it was fine and worked properly.But then when you boot it will say the missing firmwares are cd Download >

the site in which you can look for your missing drivers are mentioned below. I hope this tutorial is useful for you!

these are basically known as the non-free firmwares or drivers that you PC/Laptop needed when installing Kali-Linux you can find there here:

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

🐧 Как добавить официальные репозитории Kali Linux в sources.list

В терминале проверьте текущий список репозиториев apt, присутствующих в системе.

Если репозитории APT отсутствуют, вставьте приведенный ниже код, чтобы добавить их.

Обновите список ваших пакетов:

При желании вы можете сделать обновление системы

Наконец-то нашёл рабочий вариант. Спасибо!

Всегда рады 🙂 оставайтесь с нами

• Аудит ИБ (44)
• Вакансии (10)
• Закрытие уязвимостей (98)
• Книги (27)
• Мануал (1 937)
• Медиа (66)
• Мероприятия (38)
• Мошенники (22)
• Обзоры (724)
• Обход запретов (33)
• Опросы (3)
• Скрипты (106)
• Статьи (292)
• Философия (77)
• Юмор (17)

Anything in here will be replaced on browsers that support the canvas element

Источник

👨⚕️️ Как правильно обновить ваш Kali Linux

Kali Linux требует постоянного обновления, чтобы поддерживать инструменты в рабочем состоянии.

Сегодня мы собираемся показать, как правильно обновить ваш Kali Linux.

Наиболее распространенные причины сбоя установки Kali Linux – это обновление из неофициальных репозиториев.

Шаг 1: Официальные репозитории для Kali Linux

Первый шаг – установить правильные официальные репозитории Kali Linux.

Убедитесь, что ваш /etc/apt/sources.list содержит следующие официальные репозитории Kali:

Шаг 2: Обновление вашего Kali Linux

Давайте начнем обновлять вашу операционную систему Kali Linux. Откройте свой терминал и введите:

Эта команда обновит все и удалит старые пакеты:

Если вы хотите увидеть список обновляемых инструментов:

Шаг 3: Обновление сохраненных пакетов

Мы можем обновить отдельные пакеты, используя apt install PACKAGE-NAME или обновить все пакеты одновременно, используя

Шаг 4: Удалите ненужные пакеты

Чтобы удалить все ненужные пакеты Kali Linux, попробуйте команду:

• Аудит ИБ (44)
• Вакансии (10)
• Закрытие уязвимостей (98)
• Книги (27)
• Мануал (1 937)
• Медиа (66)
• Мероприятия (38)
• Мошенники (22)
• Обзоры (724)
• Обход запретов (33)
• Опросы (3)
• Скрипты (106)
• Статьи (292)
• Философия (77)
• Юмор (17)

Anything in here will be replaced on browsers that support the canvas element

Источник

How do I install «non-free firmware» (wifi driver) from USB?

I’m dual-booting kali linux with windows 10. While boot installation kali linux asks for:

Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.

The missing firmware files are: iwlwifi-7265D-21.ucode iwlwifi-7265D-20.ucode iwlwifi-7265D-19.ucode iwlwifi-7265D-18.ucode iwlwifi-7265D-17.ucode iwlwifi-7265D-16.ucode iwlwifi-7265D-15.ucode iwlwifi-7265D-14.ucode iwlwifi-7265D-13.ucode rtl_nic/rtl8107e-2.fw If you have media available now, insert it, and continue.

Load missing firmware from removable media? No Yes

I’ve already tried this solution but It doesn’t work. It suggests to download non-free firmware from here. I downloaded and extract firmware.zip and extracted into FAT 32 USB.

When I tap on Yes to allow installer to load missing firmware from USB, that same page is again displayed and it again asked me to load firmware. It means installer is not actually detecting firmwares from removable USB.

It might be because the firmwares I extracted from the firmware.zip are not the one installer is asking for?

These are the list of files which installer is demanding for. I copied them in FAT32 USB but installer is not detecting them:

What am I missing?

Источник