Networking with linux commands

14 Useful Linux Networking Commands

Geekflare is supported by our audience. We may earn affiliate commissions from buying links on this site.

Configuring, monitoring, and securing networks form an essential part of a Sysadmin’s job. When it comes to managing Linux networks, there are many commands and utilities available.

At times networked systems fail. You as an administrator are required to diagnose and resolve issues. Monitoring helps in detecting problems and fixing them before things get out of hand. Monitoring for security and performance also forms an essential part of an admin’s activities.

Here we discuss some commonly used commands to manage Linux networks.

The iproute2 package includes the IP command which is used for network and routing configuration. This replaces the traditional ifconfig and route commands.

ip takes a second argument that specifies the object on which you wish to execute a command and an action like add, delete, or show.

ip link

ip link is for configuring, adding, and deleting network interfaces. Use ip link show command to display all network interfaces on the system :

You can see the man page for ip link with:

ip address

Use ip address command to display addresses, bind new address or delete old ones. The man page ip address command is named as ip-address.

For example, the following command shows the IP address assigned to the network interface enp0s8:

ip route

Use the IP route to print or display the routing table. The following command displays the contents of the routing table:

While Nmap had been used in many movies, The Matrix Reloaded ( Wikipedia , IMDB , Amazon ) turned Nmap into a movie star!.

Nmap (“Network Mapper”) is a powerful utility used for network discovery, security auditing, and administration. Many system admins use it to determine which of their systems are online, and also for OS detection and service detection.

The default Nmap scan shows the ports, their state (open/closed), and protocols. It sends a packet to 1000 most common ports and checks for the response.

To check which hosts on your network are up:

Use -O flag to identify which operating system a host is running.

A word of caution: Nobody appreciates their systems being scanned over the internet. So before you do so, seek permission.

You can also use Nmap on Windows, check out this installation guide.

Use ping to see if a host is alive. This super simple command helps you check the status of a host or a network segment. Ping command sends an ICMP ECHO_REQUEST packet to the target host and waits to see if it replies.

However, some hosts block ICMP echo requests with a firewall. Some sites on the internet may also do the same.

By default, ping runs in an infinite loop. To send a defined number of packets, use -c flag.

With -o flag ping exits successfully after receiving one reply packet.

You can use -n flag to avoid reverse DNS lookups. The ICMP sequence number is particularly important. A Break in sequence numbers indicates lost packets.

A failed ping could be due to

• network failure
• host being not alive
• firewall blocking ICMP ECHO requests

You can also perform an online ping test to check the connectivity from different parts of the world.

iPerf

While ping verifies the availability of a host, iPerf helps analyze and measure network performance between two hosts. With iPerf, you open a connection between two hosts and send some data. iPerf then shows the bandwidth available between the two hosts.

You can install an iPerf using your distribution package manager. For example on Ubuntu-based distributions you can install like this:

Once you have installed iPerf on both the machines, start the iPerf server on one of them. The following example starts the iPerf server on a host with IP address 10.0.0.51.

On the second machine start iPerf with the -c flag. This connects with the server and sends some data.

iPerf returns with the bandwidth results in a few seconds.

traceroute

If ping shows missing packets, you should use traceroute to see what route the packets are taking. Traceroute shows the sequence of gateways through which the packets travel to reach their destination. For example, traceroute from my machine to google.com shows the following:

Line 4 in this output shows a * in the round trip times. This indicates no response was received. This can be due to many reasons – as the traceroute ICMP packets are low-priority, these may be dropped by a router. Or there could be simply congestion. If you see a * in all the time fields for a given gateway, then possibly the gateway is down.

Many web-based route tracing tools allow you to do a reverse traceroute, that is, from a website to your host. You can check these at traceroute.org or Geekflare Traceroute.

tcpdump

tcpdump is a packet sniffing tool and can be of great help when resolving network issues. It listens to the network traffic and prints packet information based on the criteria you define.

For example, you can examine all packets sent to or from a particular host, Ubuntu18 in this example:

By default, tcpdump resolves IP addresses to hostnames. Use -n flag, if you do not want tcpdump to perform name lookups.

tcpdump output prints one line for each packet. Use -c flag to limit output, 5 in the example above.

tcpdump is useful for solving network problems and also identifying potential problems. It is a good idea to run a tcpdump on your network occasionally to verify everything is in order.

netstat

Netstat command is used to examine network connections, routing tables, and various network settings and statistics.

Use -i flag to list the network interfaces on your system.

Here is an example:

Using -r flag will display the routing table. This shows the path configured for sending network packets.

An asterisk in the last two lines indicates that no gateway is required to send packets to any host on these networks. This host is directly connected to the networks 10.0.0.0 and 10.0.2.0.

In the first line, the destination is the default, which means any packet destined for a network not listed in this table is handled by the router 10.0.2,2.

netstat command without any options displays a list of open sockets. Use -l flag to show only listening sockets, which by default, are not shown. You can use -a flag to show listening and non-listening sockets. Here is an example:

More Netstat command example here

Linux installations have a lot of services running by default. These should be disabled or preferably removed, as this helps in reducing the attack surface. You can see what services are running with the netstat command. While netstat is still available, most Linux distributions are transitioning to ss command.

use ss command with -t and -a flags to list all TCP sockets. This displays both listening and non-listening sockets.

To display only TCP connections with state established:

ssh enables you to connect securely with remote hosts over the internet. Earlier rlogin and telnet were used to connect to and administer remote hosts. However, both suffer from a fundamental flaw, that is, they send all information including login names and passwords in cleartext.

ssh enables secure communication over the internet with the following two features :

• It confirms that the remote host is, who it says it is.
• It encrypts all communication between the hosts.

To connect to a remote host you need to have an OpenSSH server running on the remote host. You can install it using your distribution package manager. For example on Ubuntu you can install it like this:

Here is an example showing how you can connect to the remote host 10.0.0.50 using the ssh command:

You get a message saying that the authenticity of the host 10.0.0.50 cannot be established, this is because it’s the first time a connection is being made with 10.0.0.50 (server) and the ssh client has never seen this remote host before. Enter yes to continue connecting. Once the connection has been established, you are prompted for a password:

After you enter the correct password, you are logged into the remote host.

You can exit this remote shell with the exit command.

Also, you can easily execute a single command on the remote host using ssh. For example, to run df -h on the remote host:

scp and sftp

scp (secure copy) is very similar to cp command for copying files, with an addition – you can include remote hostnames in the source or destination pathnames. The hostname and the directory path are separated by a colon. This enables you to copy files securely over the network in an encrypted form. The following command copies a.txt from the local machine to 10.0.0.50 :

sftp (secure ftp) is also a file copy program similar to ftp . However, it uses an SSH encrypted tunnel to copy files, instead of sending everything in cleartext. Also, you do not need an FTP server running on the remote host. You only need an ssh server. Here is an example session:

Ifconfig

Mostly we use ifconfig command to check the IP address assigned to the system.

dig (Domain Information Groper) is a flexible tool for interrogating DNS name servers.

It performs DNS lookups and displays the answers that are returned from the name servers.

telnet

telnet connect destination’s host and port via a telnet protocol if a connection establishes means connectivity between two hosts is working fine.

nslookup

nslookup is a program to query domain name servers and resolving IP.

Summary

Networking in Linux is a vast subject, with a large number of commands and utilities. In this article, we have discussed some commonly used commands which hopefully, will help you in managing and securing your network.

Источник

13 Linux Network Configuration and Troubleshooting Commands

Computers are connected in a network to exchange information or resources each other. Two or more computer connected through network media called computer network. There are number of network devices or media are involved to form computer network. Computer loaded with Linux Operating System can also be a part of network whether it is small or large network by its multitasking and multiuser natures. Maintaining of system and network up and running is a task of System / Network Administrator’s job. In this article we are going to review frequently used network configuration and troubleshoot commands in Linux.

Linux Network Configuration and Troubleshooting Commands

1. ifconfig

ifconfig (interface configurator) command is use to initialize an interface, assign IP Address to interface and enable or disable interface on demand. With this command you can view IP Address and Hardware / MAC address assign to interface and also MTU (Maximum transmission unit) size.

ifconfig with interface (eth0) command only shows specific interface details like IP Address, MAC Address etc. with -a options will display all available interface details if it is disable also.

Assigning IP Address and Gateway

Assigning an IP Address and Gateway to interface on the fly. The setting will be removed in case of system reboot.

Enable or Disable Specific Interface

To enable or disable specific Interface, we use example command as follows.

Enable eth0

Disable eth0

Setting MTU Size

By default MTU size is 1500. We can set required MTU size with below command. Replace XXXX with size.

Set Interface in Promiscuous mode

Network interface only received packets belongs to that particular NIC. If you put interface in promiscuous mode it will received all the packets. This is very useful to capture packets and analyze later. For this you may require superuser access.

2. PING Command

PING (Packet INternet Groper) command is the best way to test connectivity between two nodes. Whether it is Local Area Network (LAN) or Wide Area Network (WAN). Ping use ICMP (Internet Control Message Protocol) to communicate to other devices. You can ping host name of ip address using below command.

In Linux ping command keep executing until you interrupt. Ping with -c option exit after N number of request (success or error respond).

3. TRACEROUTE Command

traceroute is a network troubleshooting utility which shows number of hops taken to reach destination also determine packets traveling path. Below we are tracing route to global DNS server IP Address and able to reach destination also shows path of that packet is traveling.

4. NETSTAT Command

Netstat (Network Statistic) command display connection info, routing table information etc. To displays routing table information use option as -r.

For more examples of Netstat Command, please read our earlier article on 20 Netstat Command Examples in Linux.

5. DIG Command

Dig (domain information groper) query DNS related information like A Record, CNAME, MX Record etc. This command mainly use to troubleshoot DNS related query.

For more examples of Dig Command, please read the article on 10 Linux Dig Commands to Query DNS.

6. NSLOOKUP Command

nslookup command also use to find out DNS related query. The following examples shows A Record (IP Address) of tecmint.com.

For more NSLOOKUP Command, read the article on 8 Linux Nslookup Command Examples.

7. ROUTE Command

route command also shows and manipulate ip routing table. To see default routing table in Linux, type the following command.

Adding, deleting routes and default Gateway with following commands.

Route Adding

Route Deleting

Adding default Gateway

8. HOST Command

host command to find name to IP or IP to name in IPv4 or IPv6 and also query DNS records.

Using -t option we can find out DNS Resource Records like CNAME, NS, MX, SOA etc.

9. ARP Command

ARP (Address Resolution Protocol) is useful to view / add the contents of the kernel’s ARP tables. To see default table use the command as.

10. ETHTOOL Command

ethtool is a replacement of mii-tool. It is to view, setting speed and duplex of your Network Interface Card (NIC). You can set duplex permanently in /etc/sysconfig/network-scripts/ifcfg-eth0 with ETHTOOL_OPTS variable.

11. IWCONFIG Command

iwconfig command in Linux is use to configure a wireless network interface. You can see and set the basic Wi-Fi details like SSID channel and encryption. You can refer man page of iwconfig to know more.

12. HOSTNAME Command

hostname is to identify in a network. Execute hostname command to see the hostname of your box. You can set hostname permanently in /etc/sysconfig/network. Need to reboot box once set a proper hostname.

13. GUI tool system-config-network

Type system-config-network in command prompt to configure network setting and you will get nice Graphical User Interface (GUI) which may also use to configure IP Address, Gateway, DNS etc. as shown below image.

Linux GUI Network Configuration Tool

This article can be useful for day to day use of Linux Network administrator in Linux / Unix-like operating system. Kindly share through our comment box if we missed out.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник