Linux find and copy files

Копирование файлов в Linux

Копирование файлов — одна из задач, наиболее часто возникающих перед пользователями персонального компьютера. Конечно, можно открыть файловый менеджер, войти в нужную папку и скопировать файл с помощью контекстного меню — тут не о чем говорить. Но в этой статье я хотел бы рассмотреть копирование файлов в Linux с помощью терминала.

Не всегда есть доступ к файловому менеджеру: из-за различных поломок графическая оболочка на домашнем компьютере может быть недоступна, а на серверах используется только консольный интерфейс. К тому же копирование файлов Ubuntu через терминал намного эффективнее, и вы сами в этом убедитесь. Сегодня мы рассмотрим не только обычное копирование командой cp Linux, но и не совсем обычное: с помощью tar и find.

Утилита копирования файлов cp

Название утилиты cp — это сокращение от Copy, что означает копировать. Утилита позволяет полностью копировать файлы и директории.

Синтаксис и опции

Общий синтаксис cp выглядит вот так:

$ cp опции файл-источник файл-приемник

$ cp опции файл-источник директория-приемник/

После выполнения команды файл-источник будет полностью перенесен в файл-приемник. Если в конце указан слэш, файл будет записан в заданную директорию с оригинальным именем.

Утилита имеет несколько интересных опций, которые могут сильно помочь при нестандартных задачах копирования, поэтому давайте их рассмотрим:

• —attributes-only — не копировать содержимое файла, а только флаги доступа и владельца;
• -f, —force — перезаписывать существующие файлы;
• -i, —interactive — спрашивать, нужно ли перезаписывать существующие файлы;
• -L — копировать не символические ссылки, а то, на что они указывают;
• -n — не перезаписывать существующие файлы;
• -P — не следовать символическим ссылкам;
• -r — копировать папку Linux рекурсивно;
• -s — не выполнять копирование файлов в Linux, а создавать символические ссылки;
• -u — скопировать файл, только если он был изменён;
• -x — не выходить за пределы этой файловой системы;
• -p — сохранять владельца, временные метки и флаги доступа при копировании;
• -t — считать файл-приемник директорией и копировать файл-источник в эту директорию.

Примеры копирования файлов в linux

Теперь, когда вы знаете основные опции, можно перейти к практике. Например, мы хотим скопировать некую картинку из домашней папки в подкаталог pictures:

Или можем явно указать имя новой картинки:

Копирование папок осуществляется с помощью ключа -r:

После выполнения этой команды копирования

/папка будет скопирована в папку

/Документы. Главное, не забывайте поставить слэш в конце выражения или использовать опцию -t. Иначе папка

/документы будет перезаписана.

По умолчанию команда cp Linux перезаписывает существующие файлы или папки, но можно заставить утилиту спрашивать, нужно ли перезаписывать каждый файл, если вы не уверены в правильности составления команды:

Есть и противоположная опция -n, означающая «никогда не перезаписывать существующие файлы».

Опция -u полезна в следующем случае: вы знаете или предполагаете, что в директории, куда копируется файл, есть старая его версия, тогда оператор -u выполнит замену на новую версию:

Сp также поддерживает специальные символы замены * и ?. Например, следующая команда скопирует все файлы, начинающиеся на test:

Если нужно применить более сложные регулярные выражения, придётся комбинировать утилиту cp с find или egrep.

В случае, если важно сохранить права доступа к файлу и его владельца, нужно использовать опцию -p:

Для упрощения использования команды можно применять синтаксис фигурных скобок. Например, чтобы создать резервную копию файла, выполните:

Будет создан файл с таким же именем и расширением .bak

По умолчанию в cp не отображается прогресс копирования файла, что очень неудобно при работе с большими файлами, но его можно легко посмотреть с помощью утилиты cv.

Копирование файлов по регулярным выражениям в Linux

В утилите find можно применять различные условия и регулярные выражения для поиска файлов. Я уже немного писал о ней в статье как найти новые файлы в Linux. Мы можем скопировать все найденные с помощью find файлы, вызвав для каждого из них команду cp. Например, копируем все файлы в текущей директории, содержащие в имени только цифры:

find . -name 8 -exec cp <>

Здесь точка указывает на текущую директорию, а параметр name задает регулярное выражение. Параметром exec мы задаем, какую команду нужно выполнить для обнаруженных файлов. Символ <> — подставляет имя каждого файла.

Но не find‘ом единым такое делается. То же самое можно получить, запросив список файлов директории в ls, отфильтровав его по регулярному выражению egrep и передав имена файлов по очереди в cp с помощью xargs:

/ | egrep ‘[a-zA-Z]’ | xargs cp -t

Это не совсем удобный способ копировать файлы Linux, но всё же он возможен. Будут скопированы все файлы из домашней директории, содержащие в имени только английские буквы.

Копирование содержимого файлов в Linux

Вы можете не только копировать сами файлы, но и управлять их содержимым. Например, склеить несколько файлов в один или разрезать файл на несколько частей. Утилита cat используется для вывода содержимого файла, в комбинации с операторами перенаправления вывода Bash вы можете выполнять копирование содержимого файла Linux в другой файл. Например:

cat файл1 > файл2

Если файл был не пустым, он будет перезаписан. Или мы можем склеить два отдельных файла в один:

cat файл1 файл2 > файл3

Специальное копирование файлов в Linux с помощью tar

Linux интересен тем, что позволяет выполнять одно и то же действие различными путями. Копирование в Linux тоже может быть выполнено не только с помощью cp. При переносе системных файлов в другой каталог, резервном копировании системных файлов и т.д. важно чтобы сохранились атрибуты, значения владельцев файлов и символические ссылки как они есть без какой-либо модификации.

Утилита cp тоже может справиться с такой задачей? если указать опцию -p, но можно использовать утилиту архивации tar. Мы не будем создавать никаких файлов архивов, а построим туннель. Первая часть команды пакует файл и отправляет на стандартный вывод, а другая сразу же распаковывает в нужную папку:

tar cf — /var | ( cd /mnt/var && tar xvf — )

Здесь мы полностью копируем содержимое папки /var в папку /mnt/var. Так вы можете копировать папку Linux, причём абсолютно любую или даже целую операционную систему.

Выводы

Теперь вы знаете, как выполняется копирование файлов Ubuntu и в Linux в целом. Как видите, в терминале это выполняется намного быстрее и эффективнее, чем с помощью графического интерфейса, если помнить нужные команды. Если у вас остались вопросы, спрашивайте в комментариях!

Источник

How To Find and Copy Certain Type Of Files From One Directory To Another In Linux

My external hard disk is a mess. Yeah because, I have dumped all files in a single directory. I was just too lazy to organize files and folders in the right order. It took me more time when I am looking for a particular file. So, I thought it would be much better if I organize the certain type of files in separate directories. I decided to create folders for each type of file and store the files in the respective folders. Say for example, all media files (audio and video) should go to a directory called Multimedia, image files to Pictures folder, and official related stuffs to a folder called ostechnix.

However, manually finding and copying a each particular type of file is tedious and quite time-consuming task. It will take hours to find and copy all files if you have large number of files. So, I did a quick Google search and found a suitable solution. If you ever wanted to copy certain type of files from one directory to another in Unix-like operating systems, here is one way to do it. There could be many ways to do this, but I found that the following method is easy and simple to follow.

Find And Copy Certain Type Of Files From One Directory To Another In Linux

We are going to use the ‘find’ command to do organize files. Find command comes pre-installed on most Unix-like distributions, so let us not bother installing it. For the purpose of this guide, I will show how to quickly find and copy mp3 files from a directory called test1 to another directory called test2.

Let us check the contents of test directory.

Sample output:

As you see in the above result, there are three mp3 files in the test1 directory. Let us copy these mp3 files to test2 directory. To do so, go to test1 directory using command:

Then, run the following command to find and copy all files that matches with extension .mp3.

Let us break down the above command and see what each option does.

• find — It’s the command to find files and folders in Unix-like systems.
• -iname ‘*.mp3’ — Search for files matching with extension .mp3.
• -exec cp — Tells you to execute the ‘cp’ command to copy files from source to destination directory.
• <> — is automatically replaced with the file name of the files found by ‘find’ command.
• /home/sk/test2/ — Target directory to save the matching files.
• \; — Indicates it that the commands to be executed are now complete, and to carry out the command again on the next match.

Clear? Good! Now, let us check the test2 directory to verify if the files were copied properly.

Sample output would be:

As you can see, all files with extension .mp3 have been copied from test1 to test2 directory. Similarly, you can copy other types of files to different directories of your choice as described above.

The above command will copy all *.mp3 files from the source directory and its sub-directories as well. If you don’t want to do that, use -maxdepth flag. For example the following command will copy all .mp3 files from the source directory only, but not from its sub-directories.

This way you can save a lot of time when you want to find a particular type of file. This trick could be helpful when you have to transfer large amount of different types of files from one directory to another.

Related read:

For more details, refer man pages.

There is also a script named ‘Classifier’ that will automatically organize your files based on the file extension to different directories. More details can be found in the link given below.

Источник

Linux ‘find’ command: How to find and copy files

Linux find/copy FAQ: How can I use the find command to find many files and copy them all to a directory?

I ran into a situation this morning where I needed to use the Linux find command to (a) find all the MP3 files beneath my current directory and (b) copy them to another directory. In this case I didn’t want to do a cp -r command or tar command to preserve the directory structure; instead, I wanted all of the files to end up in the same directory (so I could easily import them into iTunes).

In short, here’s the find command I used to find and copy all of those files:

If you’re familiar with the find command and have used the -exec option before, the only thing hard about this command is knowing where to put the curly braces and the \; in the command.

1. In this example, all the MP3 files beneath the current directory are copied into the target directory (/tmp/MusicFiles). Again, this isn’t a cp -r command; all of these files will end up in one folder.
2. As a result, if there are duplicate file names, some of the files will be lost.
3. If you don’t want to overwrite existing files, use the cp -n command, like this:

The -n option of the cp command means “no clobber,” and you can also type that as cp —no-clobber on some systems, such as Linux. (The -n option appears to work on MacOS systems, but —no-clobber does not.) Be sure to test this command before using it on something important; I haven’t tested it yet, I just read the man page for the cp command.)

If you ever need to use the Linux find command to find a large collection of files and copy them to another location, I hope this has been helpful.

Another example: Find and move

Here’s another example of a “find and copy” command I just used, though in this case it was a “find and move” command. In this case I had a bunch of files (with unique names) in subdirectories, and used this command to copy them all to the current directory:

As before, this is a dangerous command, so be careful. With this command, if you have duplicate filenames, you will definitely lose data during the move operations.

Источник

40 Best Examples of Find command in Linux

Geekflare is supported by our audience. We may earn affiliate commissions from buying links on this site.

The Linux find command is a powerful tool that enables system administrators to locate and manage files and directories based on a wide range of search criteria. It can find directories and files by their name, their type, or extension, size, permissions, etc.

Besides locating files and directories, combining the find command with others enables you to take action on the results. Adding the -exec option enables sysadmins to run external commands and perform actions like copying, moving, deleting, or changing permissions of the files matching the specified criteria such as size, name, etc.

In this article, we will start by explaining the basic Linux find commands with examples. This will show you how to find files and directories. We will then show you how to use the -exec option to act on the files or directories based on their size, permissions, etc.

The general syntax for the find command is

• path specifies the directory.
• name-of file or dir-to-search : Name of the file or directory to look for
• action-to-take : such as copy, delete, move, etc.

In this tutorial, we will explain how to locate files and directories matching specified patterns. We will also see how to perform actions on the files or directories that the find command locates. The guide is based on Ubuntu but is applicable to most Linux distributions and versions.

Find files and Directories

Find specific files by name or extension

To look for a specific file, run the following command from the root (/). The command contains the exact name for the file you are searching for.

Please note that the results include the path. This is important if you don’t know the directory where the file is located, or when it is in more than one place.

You can also search for the file in another directory while still in the current location. In this case, you need to provide the path for the directory where you want to search.

Looking for specific files in another directory

In our case, we will look for all those starting with the letters file in the test directory.

Search for files by extension

To find a file in Linux with a certain extension, add it to the command.

Find files and directories by name

Use the command below to look for files and directories starting with the letters qa . In our computer, we have the qatree.txt and qa.txt files as well as a directory by the name qa .

If we run the command;

It returns the following output

The command returns both the files and directories matching the search criteria. To find files or directories only, you need to specify this in the command.

Find files or directories only

For files only, use the type f switch.

Files only

Directories only

Add the type d option to locate directories only.

Case insensitive find command

All searches with -name switch are case sensitive and will not give results with capital letters. To get all cases, use the -iname option.

Search for a file from multiple directories

To find the files in different directories, add their paths in the command. In our case, we will check in the test and numeric directories.

Find multiple files with different extensions from all directories

You can use the find command to locate multiple files that share the different extensions such as *.doc , *.txt *.pdf , etc. This can be done separately, one extension at a time, or using just one command that includes all the desired extensions.

find . -type f ( -name «*.txt» -o -name «*.pdf» -o -name «*.doc» )

Find files containing certain text

Sometimes, you want to access a file containing certain text but cannot recall its file name or location. This command allows you to find all the files containing your target text.

To look for all the files containing the word hyperconvergence”, use;

The –i option enables the command to ignore cases and will find the text whether capitalized or not i.e. hyperconvergence, Hyperconvergence , etc.

To look for the files in a specific directory, simply add them to the command

Find Files and Directories Based on Size

You can find all files or directories that are smaller, equal or greater than a certain size, within a certain range or empty. Use the appropriate size format depending on the type of files or directories you are searching for.

Size options include;

Find files of a certain size – equal to 30MB

To Search find all 30MB files

Find files larger than a specified size

Find files less than 10MB in the current directory

Find files with sizes between 100-200MB

When looking for files within a specific range such as between 100 and 200 MB

Look for directories larger than 20kb

find / -type d -size +20k

Find empty files and directories.

Files

find ./ -type f -size 0

Directories

Find files by age or modification time

Find files older than n days

The -mtime +8 will look for txt files that are older than 8 days.

By modification date

This will look for files modified within the last 17 hours

Looks for directories modified within the last 10 days

Find files based on access or modification

Find files based on date or time accessed. This allows you to see files that have or haven’t been accessed within a specified period.

To see files that have not been accessed within the last 10 days in the home directory.

Files accessed exactly 10 days ago

Accessed within the last 10 days

Find files modified within the last n days

You can also look for the files in the /home directory modified within the last 10 days using the command;

Find files modified within a specific period.

For example, all files modified between 6 and 15 days ago in the home directory.

Files and directories accessed within the last 10 minutes

To find the files accessed within the last 10 minutes, use the -amin option.

Directories accessed within the last 10 minutes

Find files matching specific permissions

Where mode is the permission which is either numeric such as 644, 655, 700, 777 , etc, or letters such as u=x, a=r+x, etc.

You can specify the mode in the following three different ways.

1. Without a prefix when you want to find files with the exact permissions specified.
2. With “ — “ for files with at least the specified permission. This returns files with the specified as well as additional higher permissions.
3. Using “ / ” requires specifying the owner or group with the permission to the file.

Find files with permission 777

Find files with at least 766
find -perm -766

The command looks for all files in which the

• The file owner has read/write/execute permissions.
• Group has read/write permissions
• Others have read/write permission

As such, it returns two files that meet this criterion – file1 and file2. The files do not need to have the exact 766 permissions and can have additional ones as long but must have at least the specified.

Find files writable by the owner

We will now use the “ / ” to looks for files writable by either their owner, or group, or others.

The above looks for files that are writable by either their owner or group.
This returns files that are writable by either but not necessarily both. To see files, where both have writable permissions, use the – prefix.

Find files owned by a user

Find all files owned by Jack

Find specific files owned by a user

Find all text files owned by Jack

Find and list files and directories together with their permissions

Find and act on the results

In this section, we will look at how you can act on the files that match the pattern specified in the find command.

Find files and change permissions

Find and change permissions of certain file types. In our case, we will work with PHP files with different permissions as shown below.

We will now look for all the PHP files (above) and replace their permissions with 755

The command looks for PHP files in the ver directory and then sets their permission to 755 ( rwxr-xr-x )

Find and change file and directory permissions

Find files with 644 permissions and change them to have 655 permissions

You can also look for directories with 644 permissions and replace this with 755.

The docs folder has 644 permissions

To set it to 755 , we run

Now we can check again to see what exactly 755

From above we can see the root and docs directories have the 755 permissions.

Ls –la command gives the following details

Find and copy files or directories

Find and copy a specific file to a directory

The command below will find the file22.tx t file and copy it to the

Find and copy one type of files to a directory

To find files such as images with jpg extension in the current directory and copy them to a different location like an images folder, use;

This will find and copy all the jpg files to the

Find and copy one file to many directories

Find and copy a single to multiple directories.

This will find the file hci file and copy it to the three directories of /tmp/dir1/ /tmp/dir2/ and $HOME/3/

Find and move files to a different directory

To move a known file from a directory to another. To move the universal.php file;

Search and move files with a certain extension to a different folder

Find certain files and move to a specific different folder

The command looks for all the files with names starting with uni and having any extension. It then moves them to the directory /unifiles/

Find and move files based on age

Find and move files older than specified days to a different location such as the archive.

This will look for pdf files older than 20 days and move them to the backup1 directory.

Find and delete files and directories

The syntax for finding and removing files or directories in the current directory is

find . -type f -name «file to delete» -exec rm -f <> ; to delete files only or

find . -type d -name «dir-to-delete» -exec rm -rf <> ; to delete directories only

Find and delete specific files only

To find and delete files starting with til, use;

To find and delete directories starting with til

Remove both files and directories

This will remove both files and directories starting with the letters til.

Delete by extension

Below is how you can locate and delete all txt files in the current directory. Replace the txt with another extension such as bak , pdf or any other that you want to remove.

In case you want the system to prompt you to confirm before deleting each file, add the -i option as below.

By default, the -rm will not remove the directories and you need to use the –r option to ensures a recursive removal. This ensures the deletion of empty directories and those containing files. The -f option forces the removal and is used for both the files and directories.

Find and delete files older than n days

Find and delete backup files older than 20 days from the current directory.

This will delete all .bak files older than 20 days.

Find and delete directories only

To delete a directory called dir22

Ensure that you match the directory name case or use the -iname option.

Removes both Dir22 and dir22

To confirm before deletion, use the -i option.

Output
rm: remove directory ‘./Dir22’? n
rm: remove directory ‘./dir22’? y

In our case, we typed n for directory Dir22 which will not be deleted and y for the dir22 which will now be removed.

Find and remove empty files

You can use any of the following commands to locate empty files and delete them automatically.

or
find ./ -type f -size 0 | xargs rm -f
or
find ./ -type f -size 0 –delete

Find and remove empty directories

To remove empty directories we will use the d option.

Another alternative is to use delete instead of remove.

Please note that deleting system or critical files from your computer can damage the operating system or applications or lead to loss of your important data.

To avoid accidental deletions, it is best practice to use a non-root user account. Also, ensure that you are deleting the right files that are not useful and that you have a backup of all your data files just in case.

What’s next?

Go ahead and try the above Linux find commands in your lab or NON PRODUCTION environment. See if you can use some to automate the file system cleanup with Crontab. And, to master Linux, check out this online course.

Источник