Linux change date all files

Linux Set Date and Time From a Command Prompt

H ow can I set the system date and time from the command prompt (bash shell)? I don’t have GUI installed and I am login over ssh session. How can I set date under Linux operating systems?

Use the date command to display the current date and time or set the system date / time over ssh session. You can also run the date command from X terminal as root user.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	None
Est. reading time	2m

This is useful if the Linux server time and/or date is wrong, and you need to set it to new values from the shell prompt.

You must login as root user to use date command.

Linux Display Current Date and Time

Just type the date command:
$ date
Sample outputs:

Linux Display The Hardware Clock (RTC)

Type the following hwclock command to read the Hardware Clock and display the time on screen:
# hwclock -r
OR
# hwclock —show
$ sudo hwclock —show —verbose

OR show it in Coordinated Universal time (UTC):
# hwclock —show —utc
Sample outputs:

Linux Set Date Command Example

Use the following syntax to set new data and time:
date —set=»STRING»
For example, set new data to 2 Oct 2006 18:00:00, type the following command as root user:
# date -s «2 OCT 2006 18:00:00»
OR
# date —set=»2 OCT 2006 18:00:00″
You can also simplify format using following syntax:
# date +%Y%m%d -s «20081128»

Linux Set Time Examples

To set time use the following syntax:
# date +%T -s «10:13:13»
Where,

Use %p locale’s equivalent of either AM or PM, enter:
# date +%T%p -s «6:10:30AM»
# date +%T%p -s «12:10:30PM»

How do I set the Hardware Clock to the current System Time?

Use the following syntax:
# hwclock —systohc
OR
# hwclock -w

A note about systemd based Linux system

With systemd based system you need to use the timedatectl command to set or view the current date and time. Most modern distro such as RHEL/CentOS v.7.x+, Fedora Linux, Debian, Ubuntu, Arch Linux and other systemd based system need to the timedatectl utility. Please note that the above command should work on modern system too.

timedatectl: Display the current date and time

Type the following command:
$ timedatectl

Fig.01: Systemd Linux timedatecetl command to display the current date and time

How do I change the current date using the timedatectl command?

To change the current date, type the following command as root user:
# timedatectl set-time YYYY-MM-DD
OR
$ sudo timedatectl set-time YYYY-MM-DD
For example set the current date to 2015-12-01 (1st, Dec, 2015):
# timedatectl set-time ‘2015-12-01’
# timedatectl
Sample outputs:

To change both the date and time, use the following syntax:
# timedatectl set-time YYYY-MM-DD HH:MM:SS
Where,

1. HH : An hour.
2. MM : A minute.
3. SS : A second, all typed in two-digit form.
4. YYYY: A four-digit year.
5. MM : A two-digit month.
6. DD: A two-digit day of the month.

For example, set the date ’23rd Nov 2015′ and time to ‘8:10:40 am’, enter:
# timedatectl set-time ‘2015-11-23 08:10:40’
# date

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

How do I set the current time only?

The syntax is:
# timedatectl set-time HH:MM:SS
# timedatectl set-time ’10:42:43′
# date
Sample outputs:

How do I set the time zone using timedatectl command?

To see list all available time zones, enter:
$ timedatectl list-timezones
$ timedatectl list-timezones | more
$ timedatectl list-timezones | grep -i asia
$ timedatectl list-timezones | grep America/New
To set the time zone to ‘Asia/Kolkata’, enter:
# timedatectl set-timezone ‘Asia/Kolkata’
Verify it:
# timedatectl

How do I synchronizing the system clock with a remote server using NTP?

Simply type the following command:
# timedatectl set-ntp yes
Verify it:
$ timedatectl
Sample outputs:

Conclusion

Linux users can use date command to print or set the system date and time. Systemd based Linux users can use timedatectl to control the system time and date.

• You can also set new timzone using this mini-howto.
• Man pages – timedatectl(8)

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

Date Command in Linux: How to Set, Change, Format and Display Date

Home » SysAdmin » Date Command in Linux: How to Set, Change, Format and Display Date

Linux date command displays and sets the system date and time. This command also allows users to print the time in different formats and calculate future and past dates.

Read on to learn how to use the date command in Linux.

• A system running Linux
• A user account with root privileges
• Access to a terminal window/command line

Linux date Command Syntax

The syntax for the date command is:

How to Use date Command in Linux

To show the current system time and date, type in the date command:

The output displays the day of the week, day of the month, month, year, current time, and time zone. By default, the date command is set to the time zone of the operating system.

The -d option allows users to operate on a specific date. For example, we can type in the following command:

You can use the —date command to display the given date string in the format of a date. This command does not affect the system’s actual date and time values, and it only prints the requested date. For example:

Linux date Command Format Options

To format the date command’s output, you can use control characters preceded by a + sign. Format controls begin with the % symbol and are substituted by their current values.

Here, the %Y character is replaced with the current year, %m with month, and %d with the day of the month:

Here are another two formatting examples:

These are the most common formatting characters for the date command:

• • %D – Display date as mm/dd/yy
  • %Y – Year (e.g., 2020)
  • %m – Month (01-12)
  • %B – Long month name (e.g., November)
  • %b – Short month name (e.g., Nov)
  • %d – Day of month (e.g., 01)
  • %j – Day of year (001-366)
  • %u – Day of week (1-7)
  • %A – Full weekday name (e.g., Friday)
  • %a – Short weekday name (e.g., Fri)
  • %H – Hour (00-23)
  • %I – Hour (01-12)
  • %M – Minute (00-59)
  • %S – Second (00-60)

To see all formatting options, run date —help or the man command man date in your terminal.

Set or Change Date in Linux

To change the system clock manually, use the —set command. For example, to set the date and time to 5:30 PM, May 13, 2010, type:

Most Linux distributions have the system clock synchronized using the ntp or the systemd-timesyncd services, so be careful when the setting the clock manually.

Display Past Dates

Use the —date option to display past dates in Linux. The date command accepts values such as «tomorrow» , «Friday» , «last Friday» , «next Friday» , «next week» , and similar. So, use the following strings to print past dates::

Display Future Dates

The —date option can also display future dates. Like with past dates, you can type in strings to print upcoming dates:

Display the Date String at Line of File

The —file option prints the date string present at each line of the file. Unlike the —date option, —file can present multiple date strings at each line.

This is the syntax for the —file command:

Here we use the cat command to add dates to a file and then print them with the date command:

Display Last Modified Timestamp of a Date File

When you use the -r option, the date command prints the last modification time of a file. For example, the following command prints the last time the hosts file was changed:

Override a Time Zone

By default, the date command uses the time zone defined in /etc/localtime . To use a different time zone in the environment, set the TZ variable to the desired time zone.

For example, to switch to New York time, enter:

Type in the date command to return the system to its default time zone. To see all available time zones, use the timedatectl list-timezones command.

The date command can also show the local time for a different time zone. For example, to display the local time for 4:30 PM next Monday on the Australian east coast, type:

Use date with Other Commands

You can use the date command to create file names that contain the current time and date. The input below creates a backup MySQL file in the format of the current date:

Another common use of the date command is in shell scripts. Below we assign the output of date to the date_now variable:

Use Unix Epoch Time (Epoch Converter)

You can use the date command as an Epoch converter. Epoch, or Unix timestamps, is the number of seconds that have passed since January 1, 1970, at 00:00:00 UTC.

To show the number of seconds from the epoch to the current day, use the %s format control:

To see how many seconds passed from epoch to a specific date, enter:

You now have a good understanding of how to use the date command in Linux. If you are interested in more date/time configuration options for Linux, read How to Set or Change Timezone/Date/Time on Ubuntu.

Источник

5 Linux Touch Command Examples (How to Change File Timestamp)

Every file in Linux is associated with timestamps, which specifies the last access time, last modification time and last change time.

Whenever we create a new file, or modify an existing file or its attributes, these timestamps will be updated automatically.

Touch command is used to change these timestamps (access time, modification time, and change time of a file).

1. Create an Empty File using touch

You can create an empty file using touch command. The following example will create a zero byte new file named tgs.txt.

You can also use -c option to avoid creating new files. If you use -c option, and if a file doesn’t exists, touch will not create the file.

Commands like ls command and find command uses these timestamp information for listing and finding files.

You can also create more than 1 files from a single touch command. The following example will create 4 files named a, b, c, and d.

2. Change File’s Access Time using -a

We can change the access time of a file using -a option. By default it will take the current system time and update the atime field.

Before touch command is executed:

After the above touch command (Please note that the access time is changed):

3. Change File’s Modification Time using -m

You can change the modification time of a file using -m option.

The above method can be used to change the mtime of all obj files, when using make utility.

NOTE: It is not possible to change the ctime using touch command

4. Explicitly Setting Access and Modification time using -t and -d

Instead of taking the current time-stamp, you can explicitly specify the time using -t and -d options.

The format for specifying -t is [[CC]YY]MMDDhhmm[.SS]

The following explains the above format:

• CC – Specifies the first two digits of the year
• YY – Specifies the last two digits of the year. If the value of the YY is between 70 and 99, the value of the CC digits is assumed to be 19. If the value of the YY is between 00 and 37, the value of the CC digits is assumed to be 20. It is not possible to set the date beyond January 18, 2038.
• MM – Specifies the month
• DD – Specifies the date
• hh – Specifies the hour
• mm – Specifies the minute
• SS – Specifies the seconds

Verify the above change using stat command:

You can also use a string to change the time

For developers, touch command will be really helpful when you are working with Makefiles

5. Copy the Time-stamp from Another File using -r

You can also take a file as a reference, and update the time for other files, so that both file will hold the same time.

Источник