Double-click the icon for the FUJIFILM PC AutoSave computer application and follow the on-screen instructions to complete installation.

Once installation is complete, you can adjust network settings and select a destination folder as described in “2. Viewing Network and Destination Folder Options”.

Confirm that the computer meets the following system requirements:

Windows

OS *	Windows 10/Windows 8.1/Windows 7 (Service Pack 1)
CPU	3 GHz Pentium 4 or better
RAM	1 GB or more
Free disk space	2 GB or more
GPU	Supports DirectX 9 or later (recommended)
Video	1,024 × 768 pixels or more with 24-bit color or better
Other	.NET Framework 3.5 Service Pack 1

* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.

macOS/OS X/Mac OS X

OS *	macOS 10.15/macOS 10.14/macOS 10.13/macOS 10.12/OS X v10.11/OS X v10.10/OS X v10.9/Mac OS X v10.8
CPU	Intel (Core 2 Duo or better)
RAM	1 GB or more
Free disk space	A minimum of 200 MB required for installation with 400 MB available when FUJIFILM PC AutoSave is running
Video	1,024 × 768 pixels or more with 24-bit color or better

* Only pre-installed operating systems are supported.

Connecting to Smartphones and Computers

Connect to an iOS or Android smartphone or a Windows or Mac computer to upload pictures or control the camera remotely. We offer apps for each application and situation; read “Details” for more information before downloading the app that’s right for you.

The menus and other displays referenced here may differ from those on your camera.

Connecting to Smartphones

Use your smartphone or tablet to control the camera remotely or to view the pictures on the camera and download all or selected pictures.

These features are accessed using the FUJIFILM Camera Remote app.

Connect to the camera via Bluetooth ® or Wi-Fi (if you pair your device with a Bluetooth-equipped camera, you can also automatically connect via Wi-Fi and download pictures).

Tethered Shooting

Connect to cameras that support tethered shooting and take pictures remotely. The pictures are automatically downloaded to the computer. Depending on the camera and software used, you may also be able to control the camera remotely from the computer.

Tethered shooting is available with FUJIFILM X Acquire tethered shooting software, with Adobe ® Photoshop ® Lightroom ® plugins such as FUJIFILM Tether Shooting Plug-in PRO or FUJIFILM Tether Shooting Plug-in, or with HS-V5 for Windows ® tethered shooting software.

Software	Supported OS	Free?	Description
FUJIFILM X Acquire	Windows/ Mac	Yes 1	Simple photography and picture download
FUJIFILM Tether Shooting Plug-in 2		No 3	Standard tethered shooting
FUJIFILM Tether Shooting Plug-in PRO 2			Advanced tethered shooting
HS-V5 for Windows ®	Windows	No 4	Standard tethered shooting 5

1. Available from the FUJIFILM website.

2. Requires Adobe ® Photoshop ® Lightroom ® .

3. Can be purchased from the Adobe Add-on site.

4. Distributed on physical media.

5. Comes with software for browsing, comparing, and organizing images.

The camera connects to the computer via USB (some cameras can also connect via Wi-Fi).

Choose FUJIFILM X Acquire tethered shooting software if you only need to download pictures automatically.

HS-V5 for Windows ® is not available for Mac.

Downloading Pictures to a Computer

Photos and movies can automatically be downloaded to Windows or Mac computers via Wi-Fi.

This feature is accessed using FUJIFILM PC AutoSave computer software.

Establish a Wi-Fi connection between the camera and a wireless router.

Скачать FUJIFILM Camera Remote для ПК

• Категория: Photo & Video
• Дата выпуска: 2020-11-11
• Текущая версия: 4.6.1
• Размер файла: 48.11 MB
• Совместимость: Требуется Windows 10/8.1/8/7/Vista

FUJIFILM Camera Remote для ПК Скриншоты

загрузить и установить FUJIFILM Camera Remote на вашем персональном компьютере и Mac

Проверить совместимые приложения для ПК или альтернативы

заявка	Скачать	Рейтинг	Разработчик
fujifilm camera remote	Получить приложение или альтернативы	1.45619/5 331 рецензия

Или следуйте инструкциям ниже для использования на ПК

Если вы хотите установить и использовать FUJIFILM Camera Remote на вашем ПК или Mac, вам нужно будет загрузить и установить эмулятор Desktop App для своего компьютера. Мы усердно работали, чтобы помочь вам понять, как использовать app для вашего компьютера в 4 простых шагах ниже:

Шаг 1: Загрузите эмулятор Android для ПК и Mac

Хорошо. Прежде всего. Если вы хотите использовать приложение на своем компьютере, сначала посетите магазин Mac или Windows AppStore и найдите либо приложение Bluestacks, либо Приложение Nox . Большинство учебных пособий в Интернете рекомендуют приложение Bluestacks, и у меня может возникнуть соблазн рекомендовать его, потому что вы с большей вероятностью сможете легко найти решения в Интернете, если у вас возникнут проблемы с использованием приложения Bluestacks на вашем компьютере. Вы можете загрузить программное обеспечение Bluestacks Pc или Mac here .

Шаг 2: установите эмулятор на ПК или Mac

Теперь, когда вы загрузили эмулятор по вашему выбору, перейдите в папку «Загрузка» на вашем компьютере, чтобы найти приложение эмулятора или Bluestacks.
Как только вы его нашли, щелкните его, чтобы установить приложение или exe на компьютер или компьютер Mac.
Теперь нажмите «Далее», чтобы принять лицензионное соглашение.
Чтобы правильно установить приложение, следуйте инструкциям на экране.
Если вы правильно это сделаете, приложение Emulator будет успешно установлено.

Шаг 3: FUJIFILM Camera Remote для ПК — Windows 7/8 / 8.1 / 10

Теперь откройте приложение Emulator, которое вы установили, и найдите его панель поиска. Найдя его, введите FUJIFILM Camera Remote в строке поиска и нажмите «Поиск». Нажмите на FUJIFILM Camera Remoteзначок приложения. Окно FUJIFILM Camera Remote в Play Маркете или магазине приложений, и он отобразит Store в вашем приложении эмулятора. Теперь нажмите кнопку «Установить» и, например, на устройстве iPhone или Android, ваше приложение начнет загрузку. Теперь мы все закончили.
Вы увидите значок под названием «Все приложения».
Нажмите на нее, и она перенесет вас на страницу, содержащую все установленные вами приложения.
Вы должны увидеть . Нажмите на нее и начните использовать приложение.

Шаг 4: FUJIFILM Camera Remote для Mac OS

Привет. Пользователь Mac!
Шаги по использованию FUJIFILM Camera Remote для Mac точно такие же, как для ОС Windows выше. Все, что вам нужно сделать, это установить Nox Application Emulator или Bluestack на вашем Macintosh. Вы можете получить Это здесь .

Спасибо за чтение этого урока. Хорошего дня!

Software

By installing compatible software on your computer, it is possible to build an all-in-one workflow for things like “tethered shooting / checking the image / RAW development preview / RAW development”. In addition to FUJIFILM’s own software, you can use software that you are already familiar with.

• 

Capture One

Powerful software for photo editing, color grading, organizing and tethering – and processes the highest-quality images, delivered by Capture One

Adobe® Photoshop® Lightroom® + Tether Plugin

Photo editing, organizing and tethering software by Adobe

RAW FILE CONVERTER EX powered by SILKYPIX

RAW development software compatible with Film Simulation modes

FUJIFILM X Acquire

Software for transferring images and backing up/ restoring camera settings

FUJIFILM X RAW Studio

Unique RAW development software developed by FUJIFILM

Tethered Shooting Software HS-V5 for Windows®

Tethering software from FUJIFILM

FUJIFILM X Webcam

FUJIFILM X Webcam is a solution that can turn X Series and GFX System digital cameras into webcams.

FUJIFILM Pixel Shift Combiner

FUJIFILM Pixel Shift Combiner combines multiple images shot in the PIXEL SHIFT MULTI SHOT mode to create a Digital Negative (DNG) RAW file.

FUJIFILM X Acquire

Windows Version: Ver.1.16.0

Last Updated: 19.03.2020

Mac Version: Ver.1.19.0

Last Updated: 17.02.2021

Overview

This software is to install the FUJIFILM X Acquire to your PC. With the FUJIFILM X Acquire, you can send and save images directly to your PC via a USB cable when you take them with a camera connected to your PC.

Compatibility

Notes

Please read this update after refreshing this page.

• In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
• In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
• In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.

Detail of the software update

The software update Ver.1.16.0 incorporates the following issue:

The compatibility of tethered shooting with FUJIFILM X-T4 is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

The software update Ver.1.15.0 incorporates the following issues:

The compatibility of tethered shooting with FUJIFILM X-Pro3 and X100V is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.
  * Only “Backup/restore of camera setting” function can be used in X100V.
  * Settings other than date, custom white balance, custom registration/edit can be backup and restored.

The software update Ver.1.10 from Ver.1.9 incorporates the following issues:

The compatibility of tethered shooting with FUJIFILM GFX 50R and GFX100 is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

n case that the File Type (JPEG or RAW) to be transferred selected in the software is not selected in the IMAGE QUALITY menu in a camera, the message will appear on a PC screen.

For example, in case that only “JPEG” is selected in the software, but the IMAGE QUALITY “RAW” is selected is in the camera, the message of “No image is transferred. Check the IMAGE QUALITY menu settings of camera.” appears.

The software update Ver.1.9 incorporates the following issues:

RAW FILE COVERTER EX2.0 is added as selectable software.

You can browse images by the RAW FILE COVERTER EX2.0 when using FUJIFILM X Acquire.

_{*You need to select the RAW FILE COVERTER EX2.0 as browse software beforehand.
*This function can be used with the RAW FILE COVERTER EX2.0 version 4.3.0.0 and newer.}

The software update Ver.1.7 incorporates the following issues:

The compatibility of tethered shooting with «FUJIFILM X-H1» is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

BACKUP & RESTORE function is added in USER SETTING

When FUJIFILM X Acquire is used, this function can save all camera settings as a file and restore the setting from a stored setting. Therefore, you can change the camera settings at a moment and copy them to multiple cameras.

_{*Settings other than date, custom white balance, custom registration/edit can be backup and restored.
*GFX 50S (ver.2.00 or newer), X-T2 (ver.3.00 or newer), X-Pro2(ver.4.00 or newer), X-T20(Ver.2.00) and X100F(ver.2.00 or newer) are compatible. If your camera is old version, download the newer ones from the website below and install.}

The software update Ver.1.6 incorporates the following issues:

Tether shooting is available by wireless communication for GFX 50S and X-T2

_{*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.}

To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual.

How to Install

1. Download the exe file from this page.
2. Double click the downloaded exe file to run setup. Install it following directions appeared on dialogs.
3. Follow the instructions in the window and specify the destination folder to store transferred images when you run FUJIFILM X Acquire for the first time.

System Requirements

OS	Windows 10 (x64), Windows 8.1 (x64), Windows 7 SP1 (x64)
RAM	2GB and more recommended

Download

FUJIFILM X Acquire License Agreement

Please read this Agreement carefully before downloading this FUJIFILM X Acquire (“Software”)of FUJIFILM Corporation (“Fuji”). By checking the “Agree” box below, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download Software.

Article 1. License

Fuji grants you a nontransferable, nonexclusive, non-redistributable license to:
(i) install this Software onto computers in binary machine executable form; and
(ii) use this Software on the computer onto which the Software is installed for the purpose of using Fuji’s products.
If you violate this Agreement, Fuji may immediately terminate this license based on this article without any notice.

Article 2. Attribution of rights

All copyrights and other proprietary rights to this Software are retained by Fuji, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 3. Restrictions

You shall not, or shall not have any third party;
(i) use this Software for any purpose other than those specified in Article 1;
(ii) use, copy, distribute, etc. this Software beyond the scope specified in Article 1;
(iii) modify, adapt, translate, alter, reverse-engineer, decompile, or disassemble this Software; or
(iv) export this Software in violation of applicable export control related laws and regulations.

Article 4. Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR THIS SOFTWARE. THIS SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE THIS SOFTWARE.

Article 5. Version-Up

If Fuji provides an upgraded version of this Software to you and you download and use the upgraded version hereof, this Agreement shall also apply to such upgraded version.

Article 6. Governing Law / Jurisdiction

(1) This Agreement shall be governed by the laws of Japan.
(2) The Tokyo District Court shall have exclusive jurisdiction over the first instance for any dispute concerning this Agreement.

Article 7. Severability

If it is determined that any provision of this Agreement is invalid or unenforceable, such invalidity or unenforceability shall not render this Agreement in valid or unenforceable as a whole, and such provision shall be changed and interpreted so as to best accomplish the objective of such provision.

Detail of the software update

The software update Ver.1.19.0 incorporates the following issue:

Fix of minor bugs.

The software update Ver.1.18.0 incorporates the following issue:

Compatibility with macOS 11.0 Big Sur

The software update Ver.1.16.0 incorporates the following issue:

The compatibility of tethered shooting with FUJIFILM X-T4 is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

The software update Ver.1.15.1 incorporates the following issue:

The compatibility with macOS 10.15.2 is added.

When FUJIFILM X Acquire starts first time with the macOS 10.15.2, the dialog below to access to “Photos” will appear. Click the “OK” to accept the access. Otherwise, a camera will not recognize it.

When a camera is connected to a PC via a USB cable, the dialog below to access to “Removable volume can appear. Click the “OK” to accept the access. Otherwise, a camera will not recognize it.

The software update Ver.1.15.0.10 incorporates the following issues:

The phenomenon is fixed that a suffix like (1) is added to a file name of a JPG image when shooting with the “RAW + JPEG” setting of the camera.

The software update Ver.1.15.0 incorporates the following issues:

The compatibility of tethered shooting with FUJIFILM X-Pro3 and X100V is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.
  * Only “Backup/restore of camera setting” function can be used in X100V.
  * Settings other than date, custom white balance, custom registration/edit can be backup and restored.

Compatibility with “macOS 10.15 (Catalina)” is added.

If you use Mac with “macOS 10.15 (Catalina)”, install the latest version(1.15.0) of the “FUJIFILM X Acquire”.

The software update Ver.1.14.0 incorporates the following issues:

The compatibility of tethered shooting with «FUJIFILM GFX100» is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

The software update Ver.1.13.0 incorporates the following issues:

The compatibility of tethered shooting with «FUJIFILM GFX 50R» is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

Compatibility with “macOS Mojave” is added.

If you use a PC with “macOS Mojave”, install the latest version(1.3.0) of the FUJIFILM X Acquire.

The software update Ver.1.10 from Ver.1.9 incorporates the following issues:

The phenomenon is fixed that both “JPEG” +“RAW” files are transferred even though the file type to be transferred selected in the software is correct.

In case that the File Type (JPEG or RAW) to be transferred selected in the software is not selected in the IMAGE QUALITY menu in a camera, the message will appear on a PC screen.

For example, in case that only “JPEG” is selected in the software, but the IMAGE QUALITY “RAW” is selected is in the camera, the message of “No image is transferred. Check the IMAGE QUALITY menu settings of camera.” appears.

The software update Ver.1.9 incorporates the following issue:

RAW FILE COVERTER EX2.0 is added as selectable software.

You can browse images by the RAW FILE COVERTER EX2.0 when using FUJIFILM X Acquire.

_{*You need to select the RAW FILE COVERTER EX2.0 as browse software beforehand.
*This function can be used with the RAW FILE COVERTER EX2.0 version 4.3.0.0 and newer.}

The software update Ver.1.7.1 incorporates the following issues:

The compatibility of tethered shooting with «FUJIFILM X-H1» is added.

The additional function below can be used.

• Backup/restore of camera setting for tethered shooting.
• Tethered shooting via USB or Wi-Fi.

The software update Ver.1.7 incorporates the following issue:

BACKUP & RESTORE function is added in USER SETTING

When FUJIFILM X Acquire is used, this function can save all camera settings as a file and restore the setting from a stored setting. Therefore, you can change the camera settings at a moment and copy them to multiple cameras.

_{*Settings other than date, custom white balance, custom registration/edit can be backup and restored.
*GFX 50S (ver.2.00 or newer), X-T2 (ver.3.00 or newer), X-Pro2(ver.4.00 or newer), X-T20(Ver.2.00) and X100F(ver.2.00 or newer) are compatible. If your camera is old version, download the newer ones from the website below and install.}

FUJIFILM X Acquire has become compatible with macOS High Sierra.

The software update Ver.1.6 incorporates the following issue:

Tether shooting is available by wireless communication for GFX 50S and X-T2

_{*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.}

To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual.

How to Install

1. Download dmg file from this page.
2. Double click the downloaded dmg file to mount the volume and the volume will be displayed.
3. Drop and drag the icon of this software to the application folder.
4. Follow the instructions in the window and specify the destination folder to store transferred images when you run FUJIFILM X Acquire for the first time.

System Requirements

OS	macOS 11, 10.15, 10.14, 10.13, 10.12
RAM	2GB and more recommended

Download

FUJIFILM X Acquire License Agreement

Please read this Agreement carefully before downloading this FUJIFILM X Acquire (“Software”)of FUJIFILM Corporation (“Fuji”). By checking the “Agree” box below, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download Software.

Article 1. License

Fuji grants you a nontransferable, nonexclusive, non-redistributable license to:
(i) install this Software onto computers in binary machine executable form; and
(ii) use this Software on the computer onto which the Software is installed for the purpose of using Fuji’s products.
If you violate this Agreement, Fuji may immediately terminate this license based on this article without any notice.

Article 2. Attribution of rights

All copyrights and other proprietary rights to this Software are retained by Fuji, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 3. Restrictions

You shall not, or shall not have any third party;
(i) use this Software for any purpose other than those specified in Article 1;
(ii) use, copy, distribute, etc. this Software beyond the scope specified in Article 1;
(iii) modify, adapt, translate, alter, reverse-engineer, decompile, or disassemble this Software; or
(iv) export this Software in violation of applicable export control related laws and regulations.

Article 4. Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR THIS SOFTWARE. THIS SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE THIS SOFTWARE.

Article 5. Version-Up

If Fuji provides an upgraded version of this Software to you and you download and use the upgraded version hereof, this Agreement shall also apply to such upgraded version.

Article 6. Governing Law / Jurisdiction

(1) This Agreement shall be governed by the laws of Japan.
(2) The Tokyo District Court shall have exclusive jurisdiction over the first instance for any dispute concerning this Agreement.

Article 7. Severability

If it is determined that any provision of this Agreement is invalid or unenforceable, such invalidity or unenforceability shall not render this Agreement in valid or unenforceable as a whole, and such provision shall be changed and interpreted so as to best accomplish the objective of such provision.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.