Connect linux desktop from windows

Xrdp — Connect Ubuntu Linux Remote Desktop via RDP from Windows

How often do you access Linux Desktop? What tools do you use to access remote desktop?

Xrdp is an open source tool which allows users to access the Linux remote desktop via Windows RDP. Apart from Windows RDP, xrdp tool also accepts connections from other RDP clients like FreeRDP, rdesktop and NeutrinoRDP. Xrdp is now supporting TLS security layer.

Xrdp Requirement

  • xrdp and xorgxrdp packages
  • Listens on 3389/tcp. Make sure your firewall accepts connections

In this article, I will show how you can remotely connect to Ubuntu Desktop from a Windows machine using Xrdp tool.

1) Installation on Linux

on Ubuntu 18.04

First, you need to install Xrdp on Ubuntu

You have to configure the polkit rule to avoid an authenticate popup after inputting the username and password at the xrdp login screen on windows

restart the xrdp service

Then make sure that the service is running

Now make sure to automatically start the service at the system startup

Now you will need to check your ip address because you will need it for the connection

My ip address is 172.16.8.177 . So keeps yours it in your mind.

Xrdp works with port 3389 so make sure to open it. UFW is disabled by default so you will need to enable the firewall and create a rule for xrdp

Now you can continue the configuration on windows side

On Centos/Redhat 7

Make sure to install the Epel repositories before

Now install xrdp packages

Add a rule in the firewall. On Centos/RedHat is not ufw but firewalld to configure

Then reload the firewall

Now enable and restart the xrdp service

Check your ip address for the remote connection on Windows

2) Connect from Windows

On your windows machine such as windows 10 in our case, launch the default remote desktop connection tool.

You will need to enter the ip address of your machine and you will be asked to enter the username

Access Remote desktop of Ubuntu/CentOS

Enter the ip address and the username

Now confirm the information and launch the connection. If you are not logged out in local, the remote login would fail.

Now you will be asked for your password

Now confirm your credentials. You can see the IP address of my Ubuntu on the top and the login page. Enter your password and enjoy

Are you aware of any other tools? Please advise us on the comments

Как подключиться к Linux из Windows

В мире ИТ существует уже довольно широкий спектр операционных систем, начиная с серверных, заканчивая операционными системами для мобильных устройств. В обычных пользовательских компьютерах и в серверах довольно часто используются две ОС — Linux и Windows. Поэтому очень часто возникают ситуации, когда приходится подключаться по сети из одной операционной системы к другой для выполнения разнообразных операций.

Читайте также:  Safe mode last known good configuration start windows normally

В этой статье мы рассмотрим варианты подключения к Linux из Windows. Существуют бесплатные и условно бесплатные утилиты вроде AnyDesk или TeamViewer, но установка их довольно тривиальна и не нуждается в дополнительном пояснении. Утилиты подобного рода обладают рядом ограничений при бесплатном некоммерческом использовании, либо их функциональность не удовлетворяет тем или иным потребностям пользователя. Мы рассмотрим полностью бесплатные способы как подключится к Linux из Windows.

Удалённый доступ к Linux с помощью VNC

На сегодняшний день самое популярное удаленное подключение к Linux из Windows, с использованием привычный в Windows графического интерфейса, является VNC (Virtual Network Computing) — утилита, использующая протокол RFB (Remote FrameBuffer — удалённый кадровый буфер). Управление осуществляется путём передачи нажатий клавиш на клавиатуре и движений мыши с одного компьютера на другой и ретрансляции содержимого экрана через компьютерную сеть.

В качестве сервера VNC в данном примере будет использоваться TightVNC, установленный в Ubuntu 20.04. Для установки сервера VNC необходимо выполнить ряд действий:

Шаг 1. Установка рабочей среды XFCE

Xfce — одна из самых легковесных рабочих сред, используемых в Linux, она будет быстро работать даже при слабом и нестабильном сетевом подключении. Установите её с помощью команд:

sudo apt update

sudo apt install xfce4 xfce4-goodies

Шаг 2. Установка TightVNC

Далее установите TightVNC:

sudo apt install tightvncserver

Шаг 3. Настройка пароля

Перед началом выполнения всех действий необходимо задать пароль пользователя VNC. Выполните команду:

Вам будет предложено создать новый пароль, а также пароль только для просмотра. Откажитесь от второй опции:

Завершите процесс vncserver:

vncserver -kill :1

Шаг 4. Настройка скрипта запуска

Отредактируйте скрипт, который выполняется после запуска VNC-сервера:

Он должен содержать такой текст:

#!/bin/sh
unset SESSION_MANAGER
unset DBUS_SESSION_BUS_ADDRESS
startxfce4 &

Сделайте файл исполняемым:

Шаг 5. Запуск VNC сервера

На этом этапе уже можно запустить VNC-сервер с помощью команды:

Шаг 6. Подключение из Windows

Для того, чтобы подключиться из Windows к вашему Linux-серверу, используйте TightVNC Viewer.

Укажите IP-адрес компьютера, к которому нужно подключиться, и номер порта в поле Remote Host. В данном примере — 192.168.56.102::5901:

После того, как будет введён пароль, вы должны увидеть рабочий стол Xfce:

Шаг 8. Настройка systemd

Для того, чтобы запуск вашего VNC-сервера добавить в автозагрузку надо использовать systemd. Создайте новый файл сервиса systemd:

sudo nano /etc/systemd/system/vncserver@.service

Его содержимое должно быть следующим:

[Unit]
Description=Systemd VNC server startup script for Ubuntu 20.04
After=syslog.target network.target
[Service]
Type=forking
User=ubuntu
ExecStartPre=-/usr/bin/vncserver -kill :%i &> /dev/null
ExecStart=/usr/bin/vncserver -depth 24 -geometry 800×600 :%i
PIDFile=/home/ubuntu/.vnc/%H:%i.pid
ExecStop=/usr/bin/vncserver -kill :%i
[Install]
WantedBy=multi-user.target

Измените имя пользователя ubuntu и рабочего каталога ubuntu на нужные вам значения. Если у вас запущен VNC-сервер, остановите его:

vncserver -kill :1

Сообщите systemd о появлении нового сервиса:

sudo systemctl daemon-reload

Добавьте запуск вашего нового сервиса в список автозагрузки:

sudo systemctl enable vncserver@1.service

sudo systemctl start vncserver@1

Использование RDP для удалённого подключения

Помимо VNC, для управления Linux-сервером из Windows можно воспользоваться RDP (Remote Desktop Protocol). Для этого на компьютере с Ubuntu 20.04 установите утилиту xrdp:

sudo apt install xrdp

Для корректной работы сервиса необходимо добавить пользователя xrdp в группу ssl-cert:

sudo adduser xrdp ssl-cert

sudo apt-get install xfce4

Добавьте Xfce в сессии RDP в качестве рабочего стола по умолчанию:

Перезапустите сервис xrdp:

sudo systemctl restart xrdp.service

Процедура подключения из Windows к Linux-серверу по протоколу RDP почти ничем не отличается от подключения к удалённым Windows-серверам. Введите IP-адрес сервера, логин и пароль пользователя в Linux:

Если всё сделано правильно, вы увидите рабочий стол Xfce:

Подключение к Linux из Windows по SSH

Для подключения к компьютеру под управлением Linux по протоколу SSH из Windows можно воспользоваться PowerShell. Сначала становите OpenSSH Client, если ещё не установлен. Запустите на вашем компьютере PowerShell от имени администратора системы и выполните следующую команду:

Get-WindowsCapability -Online | ? Name -like ‘OpenSSH*’

Это необходимо для того, чтобы узнать текущую версию SSH-клиента. В данном примере доступна версия OpenSSH.Client-0.0.1.0. Установите OpenSSH.Client с помощью команды:

Читайте также:  Launch windows app on mac

Add-WindowsCapability -Online -Name OpenSSH.Client

Для того, чтобы подключиться к устройству, на котором запущен SSH-сервер, необходимо ввести имя пользователя и IP-адрес. Команда для подключения по SSH используя PowerShell выглядит так:

Здесь ubuntu — имя пользователя на удалённом компьютере, а 192.168.56.1 — IP-адрес Linux-сервера, на котором запущен демон SSH.

При первом подключении необходимо подтвердить использование специального персонального ключа для шифрованного соединения по SSH-протоколу (введите слово Yes), затем введите пароль пользователя (в данном случае для пользователя ubuntu):

Как видите, соединение прошло успешно. Теперь можно выполнять все команды так же, как если бы вы их выполняли используя стандартный Linux SSH-клиент:

Для завершения терминальной сессии на удалённом компьютере введите команду exit. Теперь вы знаете как выполняется подключение к Linux из Windows по SSH.

Использование Putty для подключения к Linux

Пожалуй, одним из самых популярных способов подключения к Linux из Windows является кроссплатформенная утилита Putty — небольшая по размерам, но очень часто незаменима для подключения по таким протоколам как SSH, Telnet, rlogin и даже с помощью последовательных портов.

Для обычного подключения к Linux-серверу по протоколу SSH достаточно в поле Host Name (or IPaddress) указать его IP-адрес и нажать кнопку Open (в данном примере Linux-сервер имеет IP-адрес: 192.168.56.102):

При первом подключении Putty предупредит, что используется специальный ключ безопасности и его нужно добавить в доверенные хосты. Нажмите кнопку Да:

Далее нужно будет ввести логин и пароль. Если всё сделано правильно, запустится удалённая сессия терминала Linux:

Мало кто знает, что Putty позволяет запустить почти любое приложение, установленное на компьютере с Linux, по сети в Windows. Для этого на компьютере с Windows нужно установить собственный X-сервер. В данном примере воспользуемся Xming.

Скачайте Xming с официального сайта. Установка довольно тривиальная, поэтому не будем на ней останавливаться. Ничего не меняйте в процессе установки. Просто нажимайте кнопку Next до тех пор, пока программа не установится и не запустится:

Когда установка Xming завершится, откройте Putty и в настройках сессии для вашего подключения в разделе SSH -> X11 включите флажок напротив опции Enable X11 forwarding, а также, в строке Отображение дисплея X впишите значение localhost:0, после чего откройте сессию подключения с помощью кнопки Open:

В открывшемся терминале Putty введите консольное название программы, обладающей графическим интерфейсом. В данном примере введено название графического редактора drawing:

(Знак & позволит запустить программу в фоновом режиме, в этом случае в окне Putty можно будет выполнять и другие команды):

Как видите, Linux-приложение drawing успешно запустилось по сети на X-сервере, установленном в Windows. С ним можно работать так же, как и с локальным приложением.

Выводы

Сегодня не существует слишком уж больших проблем для подключения к Linux из Windows. Способов существует довольно много. Каждый из них обладает своими достоинствами и недостатками, например, скорость работы VNC, да и других тоже, существенно зависит от скорости сетевого соединения. Существуют также программные средства, позволяющие подключаться к Linux-серверам используя мессенджеры или браузеры.

Connect to a Windows PC from Ubuntu using Remote Desktop Connection

One useful feature of Windows is that you can connect to your desktop from another location to remotely manage your computer. Fortunately, major Linux distributions also offer this feature and Ubuntu is one of them. If you want to connect to your Windows computers from Ubuntu remotely, you can use the default RDP client found in it, called Remmina. Here is how to create, configure and establish a remote desktop connection from Ubuntu to Windows:

NOTE: This tutorial was created on Ubuntu 18.04 LTS (Bionic Beaver). However, it works in other versions of Linux too.

Step 1: Enable Remote Desktop Connections on your Windows PC

If you want to allow other computers to connect remotely to your Windows PC, you must first configure it to accept remote desktop connections. To learn how to do it, read this tutorial: How to enable Remote Desktop Connections in all versions of Windows.

Читайте также:  Самые полезные утилиты для windows

Step 2: Launch the Remmina Remote Desktop Client

By default, Ubuntu comes with a remote desktop client app that supports the Remote Desktop Protocol (RDP) used by Windows operating systems for remote connections. You can find it in Ubuntu’s Apps list.

If you prefer to search, you can find the default Ubuntu RDP client by using the RDP search term.

Step 3: Configure and establish the Ubuntu remote desktop session to Windows

Once you open the Remmina Remote Desktop Client, you should see something like this:

Click the “Create a new connection profile” button.

Its icon is a green plus sign which is easy to spot in the top-left corner of the window.

The previous action opens a window called Remote Desktop Preference. Here you can configure the remote desktop Ubuntu to Windows connection that you are going to establish.

In the Profile section, type the Name that you want to use for the connection. It can be anything you wish. Leave the other settings from the Profile section set to their defaults.

In the Server field from the Basic tab, type the IP address of the Windows PC to which you will connect. Enter the User name and User password for the user account that you want to use on the remote Windows PC. That user account needs to exist on the Windows PC.

If you are using a Microsoft account on your Windows PC, it is OK to fill in your email address and password. If your Windows PC is part of a domain, enter it in the Domain field, otherwise, leave this field empty.

Next, you can set the Resolution and the Color depth that you want to use for your remote desktop connection. By default, the remote desktop profile is set to use the “Use client resolution” which means that the connection uses the same resolution as the Windows computer to which you connect. The Color depth is also set at the highest quality possible. However, selecting a smaller desktop resolution and color depth can improve the performance of your Linux to Windows remote desktop session. If you experience lag when connected to the remote Windows desktop, try reducing the color depth or resolution.

If you want to share a folder from your Ubuntu computer with the Windows PC, check the Share folder box and select it.

Also, for more advanced settings, go to the Advanced tab. There you can turn the sound on or off, share printers, disable clipboard synchronization, and so on.

Once you finish configuring all the details, click Save and Connect. This saves your connection profile and then initiates an RDP connection to the Windows PC.

In a matter of seconds, you should have a running remote desktop connection established to your Windows PC.

You could also Connect to the remote Windows PC, without all the personalization steps shared earlier. However, that means that you have to reconfigure the remote desktop connection profile the next time you want to remote control your Windows PC.

Do you use Ubuntu to remote control Windows PCs?

As you can see, it is easy to establish a remote desktop connection from Linux to Windows. The Remmina Remote Desktop Client is available by default in Ubuntu, and it supports the RDP protocol, so connecting remotely to a Windows desktop is almost a trivial task. Did you use it? How did it work for you? Also, if you have any questions or if you need help, feel free to leave a comment below.

Оцените статью