Apache with mysql linux

Установка и настройка Apache2+PHP5+MySQL+XDebug & Eclipse+PDT+XDebug в Ubuntu 7.10

В этом топике я расскажу как установить и настроить Apache2 + PHP5 + MySQL + virtual hosts + xdebug, а также XDebug в Eclipse+PDT.

Устанавливаем MySQL
Открываем терминал и ручками пишем:
1. sudo apt-get install mysql-server
2. После установки должен открыться диалог создания root-пароля для MySQL, если этого не произошло, то пишем:
sudo mysqladmin -u root password XXXX
где XXXX — ваш пароль
3. Теперь установим GUI для управления БД MySQL:
sudo apt-get install mysql-admin
MySQL установлен.

Устанавливаем Apache2 и PHP5
Опять же делаем ручками:
1. sudo apt-get install apache2
2. Теперь приконнектим к новоиспеченному апачу php5, вместе с библиотеками для работы с MySQL и графикой:
sudo apt-get install php5 libapache2-mod-php5 libapache2-mod-auth-mysql php5-mysql php-image-graph imagemagick
3. После установки — перезапускам апач:
sudo /etc/init.d/apache2 restart
Проверяем работоспособность нашего веб-сервера — заходим в браузер и пишем:
localhost/apache2-default
Должна появиться надпись: «It works!».
Директории по умолчанию:
/var/www/ — скрипты и файлы пользователей;
/etc/php5/ и /etc/apache2/ — конфигурационные файлы php5 и apache2;
4. Проверяем работоспособность PHP5. Создадим файл phpinfo.php:
sudo gedit /var/www/phpinfo.php
В него заносим следующее:

5. Сохраняем его и заходим по ссылке: localhost/phpinfo.php
Если появилась инфо о php5 — все ок!

Настраиваем Virtual Hosts для Apache2
1. Вводим в терминале:
sudo /etc/init.d/apache2 stop
2. sudo gedit /etc/apache2/sites-available/default
3. Закоменттим все что есть после строчки «NameVirtualHost 127.0.0.1:80» (ставим в начале строки «#»);
4. Здесь я покажу 3 способа создания виртуальных хостов. В конце файла добавляем такие строчки:

ServerAdmin webmaster@localhost
DocumentRoot /var/www/localhost/www
ServerName localhost
ErrorLog /var/log/apache2/error.log
CustomLog /var/log/apache2/access.log combined

ServerAdmin webmaster@localhost
DocumentRoot /var/www/ipbased/www
ServerName ipbased
ErrorLog /var/log/apache2/error.log
TransferLog /var/log/apache2/access.log

ServerAdmin webmaster@localhost
DocumentRoot /var/www/namebased/www
ServerName namebased
ErrorLog /var/log/apache2/error.log
TransferLog /var/log/apache2/access.log

Не забываем создать директории указанные в DocumentRoot’ах.
5. Заходим в Система > Администрирование > Сеть. Переходим во вкладку «Узлы». Ищем ip-шник «127.0.0.1». Выбрали? — нажимаем «Свойства». Добавляем такие записи:
localhost
namebased

6. Далее жмем «Добавить» и вводим ip-шник на который хотим, чтобы откликался хост «ipbased». В поле «Псевдонимы» вводим:
ipbased
7. sudo /etc/init.d/apache2 start
8. Все! Проверям хосты: ipbased, localhost, namebased, 127.0.0.1, http://[ip-адрес хоста ipbased]

Устанавливаем XDebug и соединяем его с PHP5
В случае, если вы ставили апач и пхп по выше изложенным инструкциям, то пора показать как установить и приклеить к этому всему отладчик xdebug:
1. В терминале вводим:
sudo apt-get install php-pear php5-dev
2. Далее:
sudo pecl install xdebug

На данном этапе может выскочить ошибка следующего содержания:
pecl.php.net is using a unsupported protocal — This should never happen.
install failed
Лечится это следующими командами:
# cd `pear config-get php_dir`
# mv .channels .channels-broken
# pear update-channels

По умолчанию расширения (extensions) хранятся в каталоге вида /usr/lib/php5/20060613+lfs. Мне такой путь не нравится, поэтому предлагаю поменять каталог на /usr/lib/php5/ext и прописать изменения в php.ini
sudo gedit /etc/php5/apache2/php.ini
Заменяем ;extension_dir=’./’ на extension_dir = “/usr/lib/php5/ext/”.

Я бы предложил положить строки, касающиеся xdebug, в /etc/php5/conf.d/xdebug.ini. Так реально удобнее.

Спасибо develop7.

Итак, пишем в конец файла php.ini (xdebug.ini, если использовали тюннинг №2) следующее:
zend_extension=»/usr/lib/php5/20060613+lfs/xdebug.so» ;(«/usr/lib/php5/ext/xdebug.so», если использовали тюннинг №1)
xdebug.remote_enable=1
xdebug.profiler_output_dir = «/home/yourhome/projects/tmp_xdebug» ;здесь директория для сохранения результатов профилировщика

Все. С серваком покончили 🙂

Устанавливаем Eclipse+PDT и настраиваем в нем XDebug
1. Качаем Eclipse SDK v3.3.1.1:

• если 32-битная JVM (виртуальная машина java): отсюда
• если 64-битная JVM: отсюда

2. Распаковываем эклипс в директорию на ваш выбор, запускаем его и заходим в меню Help > Software Updates > Find and Install

если при запуске эклипс матюкается, что мол «а джавы-то нет» :), то набираем ручками в терминале такую команду:
sudo apt-get install sun-java6-jdk

у меня проблема эта возникла из-за виртуальной машины java. Я поставил java-6-sun, потом поставил eclipse+pdt. PHP Perspectives отсутствовала (хотя ставил All in one)
В итоге помогла команда:
sudo update-alternatives —config java
Выбрал там установленную java-6-sun, запустил Eclipse — вуаля. все есть

Источник

Ubuntu Documentation

Hint: Server Guide

To find the Ubuntu Server Guide related to your specific version, please go to: https://help.ubuntu.com/, select your Ubuntu version and then click on Ubuntu Server Guide. For the latest LTS version (14.04.1 LTS) of Ubuntu Server, please go to https://help.ubuntu.com/14.04/serverguide/index.html

This is to help people set up and install a LAMP (Linux-Apache-MySQL-PHP) server in Ubuntu, including Apache 2, PHP 5 and MySQL 4.1 or 5.0.

To install the default LAMP stack in Ubuntu 10.04 and above

First refresh your package index.

. and then install the LAMP stack:

Mind the caret (^) at the end.

Starting over: How to remove the LAMP stack

To remove the LAMP stack remove the following packages:

• Note: This assumes you have no other programs that require any of these packages. You might wish to simulate this removal first, and only remove the packages that don’t cause removal of something desired.

To also remove the debconf data, use the purge option when removing. To get rid of any configurations you may have made to apache, manually remove the /etc/apache2 directory once the packages have been removed.

You may also want to purge these packages:

Installing Apache 2

To only install the apache2 webserver, use any method to install:

It requires a restart for it to work:

Checking Apache 2 installation

With your web browser, go to the URI http://localhost : if you read «It works!», which is the content of the file /var/www/index.html , this proves Apache works.

Troubleshooting Apache

If you get this error:

apache2: Could not determine the server’s fully qualified domain name, using 127.0.0.1 for ServerName

Ubuntu 13.10+

Use a text editor such as «sudo nano» at the command line or «gksudo gedit» on the desktop to create a new file,

to the file, save it, and enable your new configuration file by running the command below.

This can all be done in a single command with the following:

Ubuntu 13.04 and below

In older versions of Apache, the configuration files were located in a different directory. Use a text editor such as «sudo nano» at the command line or «gksudo gedit» on the desktop to create a new file,

to the file and save. This can all be done in a single command with the following:

Virtual Hosts

Apache2 has the concept of sites, which are separate configuration files that Apache2 will read. These are available in /etc/apache2/sites-available. By default, there is one site available called 000-default. This is what you will see when you browse to http://localhost or http://127.0.0.1. You can have many different site configurations available, and activate only those that you need.

As an example, we want the default site to be /home/user/public_html/. To do this, we must create a new site and then enable it in Apache2.

To create a new site:

Copy the default website as a starting point. sudo cp /etc/apache2/sites-available/000-default.conf /etc/apache2/sites-available/mysite.conf

Edit the new configuration file in a text editor «sudo nano» on the command line or «gksudo gedit», for example: gksudo gedit /etc/apache2/sites-available/mysite.conf

Change the DocumentRoot to point to the new location. For example, /home/user/public_html/

In the file: /etc/apache2/apache2.conf, change the Directory directive, replace to

You can also set separate logs for each site. To do this, change the ErrorLog and CustomLog directives. This is optional, but handy if you have many sites

Save the file

Now, we must deactivate the old site, and activate our new one. Ubuntu provides two small utilities that take care of this: a2ensite (apache2enable site) and a2dissite (apache2disable site).

Finally, we restart Apache2:

If you have not created /home/user/public_html/, you will receive an warning message

To test the new site, create a file in /home/user/public_html/:

Installing PHP 5

To only install PHP5. use any method to install the package

Enable this module by doing

which creates a symbolic link /etc/apache2/mods-enabled/php5 pointing to /etc/apache2/mods-availble/php5 .

Except if you use deprecated PHP code beginning only by «

Relaunch Apache 2 again:

Checking PHP 5 installation

In /var/www , create a text file called «test.php», grant the world (or, at least, Ubuntu user «apache») permission to read it, write in it the only line: » » (without the quotation marks) then, with your web browser, go to the URI «http://localhost/test.php»: if you can see a description of PHP5 configuration, it proves PHP 5 works with Apache.

Troubleshooting PHP 5

Does your browser ask if you want to download the php file instead of displaying it? If Apache is not actually parsing the php after you restarted it, install libapache2-mod-php5. It is installed when you install the php5 package, but may have been removed inadvertently by packages which need to run a different version of php.

If sudo a2enmod php5 returns «$ This module does not exist!», you should purge (not just remove) the libapache2-mod-php5 package and reinstall it.

Be sure to clear your browser’s cache before testing your site again. To do this in Firefox 4: Edit → Preferences … Privacy → History: clear your recent history → Details : choose «Everything» in «Time range to clean» and check only «cache», then click on «Clear now».

Remember that, for Apache to be called, the URI in your web browser must begin with «http://». If it begins with «file://», then the file is read directly by the browser, without Apache, so you get (X)HTML and CSS, but no PHP. If you didn’t configure any host alias or virtual host, then a local URI begins with «http://localhost», «http://127.0.0.1″ or http://» followed by your IP number.

If the problem persists, check your PHP file authorisations (it should be readable at least by Ubuntu user «apache»), and check if the PHP code is correct. For instance, copy your PHP file, replace your whole PHP file content by » » (without the quotation marks): if you get the PHP test page in your web browser, then the problem is in your PHP code, not in Apache or PHP configuration nor in file permissions. If this doesn’t work, then it is a problem of file authorisation, Apache or PHP configuration, cache not emptied, or Apache not running or not restarted. Use the display of that test file in your web browser to see the list of files influencing PHP behaviour.

php.ini development vs. production

After standard installation, php configuration file /etc/php5/apache2/php.ini is set so as «production settings» which means, among others, that no error messages are displayed. So if you e.g. make a syntax error in your php source file, apache server would return HTTP 500 error instead of displaying the php syntax error debug message.

If you want to debug your scripts, it might be better to use the «development» settings. Both development and production settings ini’s are located in /usr/share/php5/

so you can compare them and see the exact differences.

To make the «development» settings active, just backup your original php.ini

and create a symlink to your desired settings:

or you may of course also edit the /etc/php5/apache2/php.ini directly on your own, if you wish.

PHP in user directories

According to this blog, newer versions of Ubuntu do not have PHP enabled by default for user directories (your public_html folder). See the blog for instructions on how to change this back.

Installing MYSQL with PHP 5

Use any method to install

After installing PHP

You may need to increase the memory limit that PHP imposes on a script. Edit the /etc/php5/apache2/php.ini file and increase the memory_limit value.

After installing MySQL

Set mysql bind address

Before you can access the database from other computers in your network, you have to change its bind address. Note that this can be a security problem, because your database can be accessed by other computers than your own. Skip this step if the applications which require mysql are running on the same machine.

and change the line:

to your own internal ip address e.g. 192.168.1.20

If your ip address is dynamic you can also comment out the bind-address line and it will default to your current ip.

If you try to connect without changing the bind-address you will recieve a «Can not connect to mysql error 10061».

Set mysql root password

Before accessing the database by console you need to type:

At the mysql console type:

A successful mysql command will show:

Query OK, 0 rows affected (0.00 sec)

Mysql commands can span several lines. Do not forget to end your mysql command with a semicolon.

Note: If you have already set a password for the mysql root, you will need to use:

(Did you forget the mysql-root password? See MysqlPasswordReset.)

Create a mysql database

Create a mysql user

For creating a new user with all privileges (use only for troubleshooting), at mysql prompt type:

For creating a new user with fewer privileges (should work for most web applications) which can only use the database named «database1», at mysql prompt type:

yourusername and yourpassword can be anything you like. database1 is the name of the database the user gets access to. localhost is the location which gets access to your database. You can change it to ‘%’ (or to hostnames or ip addresses) to allow connections from every location (or only from specific locations) to the database. Note, that this can be a security problem and should only be used for testing purposes!

To exit the mysql prompt type:

Since the mysql root password is now set, if you need to use mysql again (as the mysql root), you will need to use:

and then enter the password at the prompt.

Backup-Settings

Please, let’s say something in which directories mysql stores the database information and how to configure a backup

Alternatively

There is more than just one way to set the mysql root password and create a database. For example mysqladmin can be used:

mysqladmin is a command-line tool provided by the default LAMP install.

Phpmyadmin and mysql-workbench

All mysql tasks including setting the root password and creating databases can be done via a graphical interface using phpmyadmin or mysql-workbench.

To install one or both of them, first enable the universe repository

Use any method to install

Troubleshooting Phpmyadmin & mysql-workbench

If you get blowfish_secret error: Choose and set a phrase for cryptography in the file /etc/phpmyadmin/blowfish_secret.inc.php and copy the line (not the php tags) into the file /etc/phpmyadmin/config.inc.php or you will receive an error.

If you get a 404 error upon visiting http://localhost/phpmyadmin: You will need to configure apache2.conf to work with Phpmyadmin.

Include the following line at the bottom of the file, save and quit.

Alternative: install phpMyAdmin from source

See the phpMyAdmin page for instructions on how to install phpmyadmin from source:

Mysql-workbench

Mysql-workbench runs locally, on the desktop. Use any method to install

For more information

Edit Apache Configuration

You may want your current user to be the PHP pages administrator. To do so, edit the Apache configuration file :

Search both the strings starting by «APACHE_RUN_USER» and «APACHE_RUN_GROUP», and change the names to the current username and groupname you are using. Then you’ll need to restart Apache. (look at the next chapter concerning apache commands)

Configuration options relating specifically to user websites (accessed through localhost/

username) are in /etc/apache2/mods-available/userdir.conf and managed with the a2enmod and a2dismod commands.

Installing suPHP

suPHP is a tool for executing PHP scripts with the permissions of their owners. It consists of an Apache module (mod_suphp) and a setuid root binary (suphp) that is called by the Apache module to change the uid of the process executing the PHP interpreter.

Note: suPHP enforces, security and helps avoid file permission problems under development environments with several users editing the site files, but it also demands more memory and CPU usage, which can degrade your server performance under certain circumstances.

To only install suPHP. use any method to install the package

Enable this module by doing

then use a text editor such as «sudo nano» at the command line or «gksudo gedit» on the desktop to edit this file

make a new empty line at the top of the content, then add

make a new empty line at the bottom of the content, then add

For security reasons we need to specify to suPHP what are the document paths allowed to execute scripts, use a text editor such as «sudo nano» at the command line or «gksudo gedit» on the desktop to edit this file

find the value «docroot» and specify the document path of your site files, for example:

that value restrict script execution only to files inside «/var/www/»

that value restrict script execution only to files inside a custom home folder for each configured user inside «/var/www/:$/public_html»

for this tutorial we are going to use this value

which is the same Apache directory directive set before in this document

to restart Apache, type in your terminal

Now lets create a test script to see if suPHP is working correctly, in your terminal type

that command creates a quick php test file to display the current user executing the script

open your browser and navigate to «localhost/whomi.php», most likely the browser will show you a «500» server error, this is because suPHP does not allow too permissive file and folder permissions and also does not allow mixed file and folder ownership, to correct this type in your terminal

those commands enforce a secure and correct file and folder permission and also set a correct user and group ownership for all of them

Now open your browser and navigate to «localhost/whomi.php», if everything went fine you should see the name of the file owner executing the script and not «www-data» unless you specified so

Run, Stop, Test, And Restart Apache

Use the following command to run Apache :

To test configuration changes, use :

Finally, to restart it, run :

Alternatively, you can use a graphical interface by installing Rapache or the simpler localhost-indicator.

Using Apache

You can access apache by typing 127.0.0.1 or http://localhost (by default it will be listening on port 80) in your browser address bar. By default the directory for apache server pages is /var/www . It needs root access in order to put files in. A way to do it is just starting the file browser as root in a terminal:

if you want to make /var/www your own. (Use only for non-production web servers — this is not the most secure way to do things.)

Status

To check the status of your PHP installation:

and insert the following line

Securing Apache

If you just want to run your Apache install as a development server and want to prevent it from listening for incoming connection attempts, this is easy to do.

Change ports.conf so that it contains:

Save this file, and restart Apache (see above). Now Apache will serve only to your home domain, http://127.0.0.1 or http://localhost.

Password-Protect a Directory

There are 2 ways to password-protect a specific directory. The recommended way involves editing /etc/apache2/apache2.conf . (To do this, you need root access). The other way involves editing a .htaccess file in the directory to be protected. (To do this, you need access to that directory).

Password-Protect a Directory With .htaccess

Warning: On at least some versions of Ubuntu, .htaccess files will not work by default. See EnablingUseOfApacheHtaccessFiles for help on enabling them.

thumbnails

If you direct your web browser to a directory (rather than a specific file), and there is no «index.html» file in that directory, Apache will generate an index file on-the-fly listing all the files and folders in that directory. Each folder has a little icon of a folder next to it.

To put a thumbnail of that specific image (rather than the generic «image icon») next to each image file (.jpg, .png, etc.):

. todo: add instructions on how to do thumbnails here, perhaps using Apache::AutoIndex 0.08 or Apache::Album 0.95 .

Known problems

Skype incompatibility

Skype uses port 80 for incoming calls, and thus, may block Apache. The solution is to change the port in one of the applications. Usually, port 81 is free and works fine. To change the port number in Skype go to menu Tools > Options, then click on the Advanced tab, then in the box of the port for incoming calls write your preference.

Other Apache Options

LocalhostSubdomain — access your local files as if you had different subdomains

Further Information

StrongPasswords is recommended reading!

BastilleLinux is also recommended if you’re going to be running a live webserver.

PHPOracle will enable you to connect to Oracle databases.

PhpPear : PHP Extension and Application Repository

ApacheMySQLPHP (последним исправлял пользователь thelateniteowl 2015-05-01 03:09:35)

The material on this wiki is available under a free license, see Copyright / License for details
You can contribute to this wiki, see Wiki Guide for details

Источник